Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Creality K2 3D printer, dark metal frame, enclosed build chamber, front glass door, top-mounted filament holder, control panel on side

Creality

Creality K2 1002110057 3D Printer 260x260x260mm 600mm/s Step-Servo

SKU CH-6PE0-ACT55 MPN 1002110057

A high-speed FDM printer with a 260 x 260 x 260 mm build volume, step-servo motion system reaching 600 mm/s, smart auto-leveling, and a 720P chamber camera for remote monitoring

  • Type3D Printer
  • TechnologyFDM (Fused Deposition Modeling)
  • Number of ExtrudersDual-gear direct drive extruder
  • Build SizeBuild Volume: 260 x 260 x 260 mm
  • FeaturesK2 SPECIFICATIONS Printing Technology: Fused Deposition Mode
  • Dimensions404 x 436 x 545 mm

Model K2

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • 260 x 260 x 260 mm build volume handles large prints
  • 600 mm/s top speed with 20000 mm/s² acceleration cuts job time
  • Step-servo motors on X, Y and extruder keep motion precise and quiet
  • Smart Auto Leveling probes only the model area for a fast, even first layer
  • 720P chamber camera detects failures, checks the bed and records time-lapses

260 mm build volume for large prints

The Creality K2 1002110057 is an FDM 3D printer with a 260 x 260 x 260 mm build volume. Step-servo motors on the X, Y and extruder axes enable speeds up to 600 mm/s and 20000 mm/s² acceleration. A dual-gear direct drive extruder and quick-swap hotend rated to 300 °C handle 1.75 mm filament at layer heights from 0.05 to 0.3 mm.

Check bed size and filament path

Verify that a 260 mm cube fits your intended models and that your workspace accommodates the 404 x 436 x 545 mm footprint. The printer uses 1.75 mm filament; ensure your spools match this diameter. Multicolor printing requires separate CFS units, so confirm you have space and budget for up to four modules if that workflow is needed.

Step-servo motion and remote monitoring

Three FOC step-servo motors drive the motion system, delivering consistent extrusion and quiet operation. Smart Auto Leveling probes only the model area for a fast first layer. A built-in 720P camera at 30 fps enables failure detection, plate checks and time-lapse recording via the Creality Cloud app. The 18.3 kg steel frame with dual Z-axis and linear rods keeps tall prints stable.

Prednosti

  • 260 x 260 x 260 mm build volume handles large prints
  • 600 mm/s top speed with 20000 mm/s² acceleration cuts job time
  • Step-servo motors on X, Y and extruder keep motion precise and quiet
  • Smart Auto Leveling probes only the model area for a fast, even first layer
  • 720P chamber camera detects failures, checks the bed and records time-lapses

Špecifikácie

BrandCreality
ModelK2
Type3D Printer
TechnologyFDM (Fused Deposition Modeling)
Number of ExtrudersDual-gear direct drive extruder
Build SizeBuild Volume: 260 x 260 x 260 mm
FeaturesK2 SPECIFICATIONS
Printing Technology: Fused Deposition Modeling
Printing Speed: max 600 mm/s
Acceleration: max 20000 mm/s2
Printing Accuracy: 100±0.1 mm
Layer Height: 0.05-0.3 mm
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm
Nozzle Temperature: max 300 °C
Heatbed Temperature: max 100 °C
Build Plate: Flexible PEI build plate
Leveling Mode: Full-auto leveling
XYE Motor: Step-servo motors for XY axis and extruder
File Transfer: USB Drive / WiFi
File Storage: 8GB EMMC
Rated Voltage: 100-240V ~ AC 50/60Hz
Display Screen: 4" color touch screen
Rated Power: 1350W (220V), 450W (110V)
S
Dimensions404 x 436 x 545 mm
Weight18.3 kg
Prepravná hmotnosť23.36 kg
Rozmery balenia632 × 508 × 508 mm

Ďalšie verzie tohto modelu

Ďalších 1 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What comes in the box with the Creality K2 and does it include the CFS units for multicolor printing?

The printer ships with the K2 unit itself; the Creality Filament System units required for up to 16-color printing are sold separately and are not included in the box.

Which build-volume option should I choose for the K2 and is there a larger or smaller variant?

The K2 is offered in a single 260 x 260 x 260 mm build volume; no other capacity or size variant is listed for this model.

What does the 600 mm/s maximum print speed mean for everyday prints on this machine?

The 600 mm/s top speed is achievable with the FOC step-servo motors and 20000 mm/s² acceleration, while the direct-drive extruder supports a 40 mm³/s high-flow hotend rated to 300 °C for consistent extrusion at high velocity.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.