darkFlash INF34R 120mm Reverse Blade PWM ARGB 3-Pack White
- Case Fan
- Case
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
darkFlash
Three 120 mm PWM fans with magnetic daisy-chain wiring, 5 V ARGB lighting and hydro bearings deliver 50-55 CFM at 30-35 dBA
Color Black
Quantity 3-Pack
Fan Direction Forward
This three-pack of 120 mm PWM ARGB fans uses a patented 7-pin magnetic connector so each unit snaps to the next without extra cables. The 5 V 3-pin ARGB header supports 16.8 million colours and syncs with major motherboard lighting ecosystems. Builders who need 12 V RGB headers or a single-fan kit should look elsewhere.
An FDB hydro bearing rated for 40,000 hours MTTF drives nine aerodynamic blades between 800 and 2,000 RPM, delivering 50–55 CFM while keeping noise between 30 and 35 dBA. Four anti-vibration pads per fan further dampen resonance. The 25 mm slim frame fits standard case mounts and most radiators without clearance issues.
The 4-pin PWM link continuously adjusts speed from 800 to 2,000 RPM as system temperature rises, maintaining airflow without sudden spikes. Magnetic daisy-chain wiring stays secure during long sessions, and the hydro bearing maintains consistent torque across extended duty cycles. Users requiring higher static pressure or thicker frames will need a different series.
| Brand | darkFlash |
|---|---|
| Part Number | G24 |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-2000 PRM |
| Air Flow | 50-55 CFM |
| Noise Level | 30 - 35 dBA |
| Power Connector | 4-pin PWM |
| Color | Black |
| LED | ARGB |
| Features | Dreamy colorful ARGB lighting; Magnetic splice design; Aerodynamic blades; Magnetic wiring connector; FDB Hydro Bearing |
| Package Contents | 3 × Gauss?G24 ARGB Fan; 4 × Anti-vibration pads; 4 × Mounting screws; 3 × PWM/ARGB splitter cable; 3 × User manual |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Align each fan's magnetic connector so the pins seat fully before snapping the next unit; the 7-pin layout only mates one way, and forcing it off-centre bends pins and breaks the ARGB signal chain.
The bearing is rated for 40000 hours MTTF; at typical 800-2000 RPM operation that translates to several years of continuous use before wear increases noise or reduces speed stability.
Sustained 2000 RPM operation raises bearing temperature until the hydro fluid viscosity drops, causing RPM to throttle below the 50-55 CFM target to protect the 40000-hour rating.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?