DELL
DELL 0M40TH 8TB 3.5" SAS 7200 RPM internal hard drive
8 TB 3.5" SAS 7200 RPM nearline drive with 12 Gb/s transfer and hot-swap tray
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Average Latency12Gb/s
- Form Factor3.5"
- 8 TB capacity stores large datasets
- 12 Gb/s SAS interface enables fast data transfer
- 7200 RPM spindle speed delivers responsive performance
- 5 inch form factor fits standard drive bays
- Hot-swap tray allows drive replacement without system downtime
Dell 0M40TH 8TB SAS Drive
The Dell 0M40TH is an 8TB 3.5-inch internal hard drive built for nearline workloads. It uses a SAS 12Gb/s interface and spins at 7200 RPM to deliver consistent throughput for bulk storage arrays.
Suits servers and arrays with SAS backplanes
This drive fits systems that accept 3.5-inch SAS devices and support hot-swap trays. It is not suitable for builds that require a different physical interface or a smaller form factor.
SAS 12Gb/s interface decides compatibility
The drive connects only through a 12Gb/s SAS port, so the host controller or backplane must provide that exact link. Without a matching SAS connection the drive cannot be used.
Prednosti
- 8 TB capacity stores large datasets
- 12 Gb/s SAS interface enables fast data transfer
- 7200 RPM spindle speed delivers responsive performance
- 5 inch form factor fits standard drive bays
- Hot-swap tray allows drive replacement without system downtime
Špecifikácie
| Brand | Dell |
|---|---|
| Model | 0M40TH |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 3.5" |
Otázky k tomuto produktu
How do I install the Dell 0M40TH 8TB 3.5" SAS drive in a hot-swap bay?
Slide the bare drive into the carrier tray until the SAS connector seats firmly, then insert the assembly into the hot-swap bay until the latch clicks.
What maintenance will the Dell 0M40TH 8TB 7200 RPM drive need later?
No routine maintenance is required; monitor SMART attributes and replace the drive if reallocated sectors or seek errors increase.
What limit appears first on the Dell 0M40TH 8TB Nearline SAS drive under sustained writes?
The 7200 RPM spindle caps sustained throughput near 200 MB/s before the 12 Gb/s SAS interface becomes a bottleneck.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
