DELL
DELL 0XMV9 1.92TB SATA 2.5 enterprise SSD
A 1.92 TB SATA enterprise SSD built for read-intensive workloads in 2.5-inch Dell PowerEdge servers
- InterfaceSATA
- 92 TB capacity stores large datasets
- SATA 6 Gb/s interface enables broad server compatibility
- Read-intensive TLC design suits heavy read workloads
- 5-inch form factor fits standard drive bays
- Tested with updated firmware for reliable operation
1.92TB SATA enterprise SSD for read-intensive
This Dell 0XMV9 drive provides 1.92TB of TLC flash storage through a 6Gbps SATA interface. It is built for read-intensive server applications such as web hosting, content delivery and virtualisation boot volumes. The SE4011 firmware is updated before shipment and the unit is supplied new.
Fits 2.5-inch hot-swap bays in compatible Dell
The 2.5-inch form factor slides directly into supported PowerEdge systems ranging from the R240 through the R960 families and the XR series edge platforms. SATA connectivity uses existing backplane cables and controllers, so no additional host-bus adapter or PCIe slot is required. This frees PCIe lanes for other accelerators or network cards.
Steady performance under continuous read-heavy load
TLC NAND and read-intensive firmware tuning keep latency predictable during sustained traffic such as database queries or streaming workloads. The drive maintains consistent throughput without the write-amplification spikes seen in mixed-use media. Endurance is aligned to read-centric duty cycles rather than heavy write logging.
Prednosti
- 92 TB capacity stores large datasets
- SATA 6 Gb/s interface enables broad server compatibility
- Read-intensive TLC design suits heavy read workloads
- 5-inch form factor fits standard drive bays
- Tested with updated firmware for reliable operation
Špecifikácie
| Brand | Dell |
|---|---|
| Model | 0XMV9, HFS1T9G32FEH-7A10A |
| Interface | SATA |
Otázky k tomuto produktu
What is the first limit reached during sustained read-intensive workloads on the 1.92 TB SATA SSD?
The drive is built for read-intensive use with TLC NAND and a SATA 6 Gbps link, so the interface throughput ceiling appears before the media wears out.
How much noise, heat or power does the 2.5-inch SSD produce when running all day in a server?
Solid-state design means no moving parts, silent operation and low heat output that a standard server bay handles without extra cooling.
Which drive carrier or backplane must the system already have to install this 2.5-inch SATA SSD?
A 2.5-inch SATA hot-plug bay or caddy, as used in the listed PowerEdge models, is required for the drive to connect and lock in place.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
