Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Dynatron T318 heatsink with vapor chamber base and copper stacked fins

Dynatron

Dynatron T318 CPU Cooler 1.05 lbs

SKU CH-3D2M-1RG0Z MPN T318

A heatsink-only CPU cooler using a vapor-chamber base and copper stacked fins, weighing 1.05 lbs

  • TypeHeatsinks only
  • Heatsink MaterialVapor Chamber Base with Copper Stacked Fin
  • Weight1.05 lbs
  • Vapor chamber base spreads heat quickly across the copper stacked fin array
  • Copper stacked fin construction increases surface area for efficient passive dissipation
  • Heatsink-only design allows flexible fan selection for custom airflow needs
  • Lightweight 1.05 lbs build reduces motherboard mounting stress
  • Vapor chamber technology transfers thermal energy faster than solid copper bases

Vapor Chamber Heatsink

The Dynatron T318 is a passive CPU cooler that relies on a vapor chamber base and copper stacked fins to move heat away from the processor. It suits builders who prefer silent operation or need a low-profile solution for restricted chassis space. No fan is included, so airflow must come from case fans or a custom duct. Buyers who want an all-in-one liquid loop or a tower cooler with a bundled fan should look elsewhere.

Vapor Chamber Base

The defining specification is the vapor chamber base paired with copper stacked fins, a combination designed to spread heat rapidly across a larger surface area. This construction replaces traditional heat pipes with a flat chamber that makes direct contact with the CPU lid. The design determines whether the cooler can handle your thermal load without active airflow assistance.

Sustained Passive Dissipation

Under continuous load the heatsink relies entirely on case airflow to carry heat away from the dense copper fin stack. Without a dedicated fan, temperatures will climb until the chassis exhaust matches the heat output, making case ventilation the limiting factor. Performance therefore scales with the quality and direction of system airflow rather than a fixed fan curve.

Prednosti

  • Vapor chamber base spreads heat quickly across the copper stacked fin array
  • Copper stacked fin construction increases surface area for efficient passive dissipation
  • Heatsink-only design allows flexible fan selection for custom airflow needs
  • Lightweight 1.05 lbs build reduces motherboard mounting stress
  • Vapor chamber technology transfers thermal energy faster than solid copper bases

Špecifikácie

BrandDynatron
ModelT318
TypeHeatsinks only
Heatsink MaterialVapor Chamber Base with Copper Stacked Fin
Weight1.05 lbs
Prepravná hmotnosť0.45 kg
Rozmery balenia133 × 113 × 62 mm

Otázky k tomuto produktu

How does the vapor chamber base with copper stacked fin design affect real-world CPU temperatures?

The vapor chamber spreads heat quickly across the base while the copper stacked fins increase surface area for air cooling, helping lower CPU temperatures under load.

What mounting interface does the T318 use and what does it limit?

The cooler uses a standard CPU socket mounting system which limits compatibility to supported socket types and motherboard layouts.

What physical clearance does the 1.05 lb heatsink require inside a case?

The 1.05 lb heatsink needs sufficient vertical clearance above the CPU socket and enough space around it to avoid interfering with RAM slots or case panels.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.