Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black metal bracket kit mounting a 3.5 SATA drive into a 5.25 bay with shock-absorbing rails and space for an 80mm fan

EN-Labs

EN-Labs 3.5" SATA HDD to 5.25" Bay Shock Absorption Bracket with 80mm Fan Space

SKU CH-QNHC-YAZ1W

A 3.5" SATA hard drive fits into a 5.25" bay using shock-absorbing rails and space for an 80 mm fan

  • FeaturesThis drive bay mounting bracket kit let your 3.5" drive comp
  • Package Contents- 5.25” holding bracket 1 piece - 3.5” hard disk drive rack
  • Fits any 3.5" SATA drive into a 5.25" bay
  • Shock-absorbing screws protect the drive and extend its life
  • Reduces mechanical noise and lowers operating temperature
  • Space for an 80mm fan improves heat dissipation
  • Tool-free assembly with included brackets and screws

3.5" to 5.25" SATA HDD Bracket

This mounting bracket kit lets a 3.5" SATA hard drive fit securely into a standard 5.25" drive bay. It is designed for builders who need to add mechanical storage to a case that only has larger optical bays available. The black finish matches most chassis interiors.

Shock absorption and 80mm fan space

The kit includes a holding bracket, two drive racks, four HDD screws and six shock-absorption screws that isolate the drive from chassis vibration. An open 80mm fan mount sits beside the drive so an optional fan can direct airflow over the platters for cooler operation. The fan itself is not included.

Limited to single-drive 5.25" bays

Only one 3.5" drive can be mounted per bracket, so each 5.25" bay consumed yields a single SATA device. Builders who need multiple drives must sacrifice several 5.25" bays or use a different mounting solution. The bracket does not support 2.5" drives or any interface other than SATA.

Prednosti

  • Fits any 3.5" SATA drive into a 5.25" bay
  • Shock-absorbing screws protect the drive and extend its life
  • Reduces mechanical noise and lowers operating temperature
  • Space for an 80mm fan improves heat dissipation
  • Tool-free assembly with included brackets and screws

Špecifikácie

FeaturesThis drive bay mounting bracket kit let your 3.5" drive completely fitted into a 5.25" drive bay.
Maxmize the interanal spece of your computer case for efficient usage.
Supports any computer case with an available 5.25" drive bay
Shock absorption design, protecting and prolonging life of hard drive
Reduce mechanical noise and working temperature
supports a 80mm fan installation( fan does not include),optimum heat radiation effect for HDD
Classic black color, easy match with any computer case
Easy installation
Package Contents- 5.25” holding bracket 1 piece
- 3.5” hard disk drive rack 2 pieces
- 3.5” HDD screws 4 pieces
- Shock Absorption Screws 6 pieces

Otázky k tomuto produktu

Do the shock-absorption screws need periodic replacement?

The six shock-absorption screws are metal fasteners with no moving parts; they do not wear out and require no scheduled replacement.

Will the 80 mm fan space restrict airflow if I install a high-RPM model?

The bracket simply provides an 80 mm mounting cut-out; any standard 80 mm fan will fit without obstruction from the bracket itself.

How much extra heat does the bracket add when the drive runs all day?

The black metal bracket acts as a passive heatsink and adds no active heat; temperatures depend on the drive and any 80 mm fan you install.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.