Fans
Fans 9225 92x92x25mm 220-240V AC ball bearing case fan
92 mm AC axial fan with ball bearing, 220–240 V, 13 W, 2250–2700 rpm, 1.05 m³/min airflow and 37 dB(A) noise
- 92 mm square frame fits standard 92 mm mounts
- 220–240 V AC input runs directly from mains power
- 13 W maximum draw keeps energy use low
- 33 dB-A at 50 Hz for quiet operation
- Ball bearing rated for long service life
AC mains 92 mm case fan
The SUNON 9225 is a 92 x 92 x 25 mm axial fan that connects directly to 110-120 V or 220-240 V AC mains at 50/60 Hz. It uses a ball-bearing motor rated at 13/11 W and spins between 2250 and 2700 R/min to deliver 0.89-1.05 M3/min of airflow at 33-37 dB-A. The frame is black-painted aluminium alloy with a PBT glass-reinforced flame-retardant impeller and Class B insulation.
Server and industrial chassis builders
This fan suits installers who need a 92 mm form factor powered from AC mains without an external adapter, such as rack-mount enclosures, telecom shelves or legacy industrial cabinets. It is not for PC builders who require a 12 V DC PWM fan for motherboard control, nor for silent-focused systems that need lower noise than 33 dB-A at minimum speed.
220-240 V AC direct connection
The defining specification is the 220-240 V AC line-voltage input with 25 cm lead wires; the unit cannot be powered from a standard PC power supply or DC fan header and must be wired into mains-rated circuitry.
Prednosti
- 92 mm square frame fits standard 92 mm mounts
- 220–240 V AC input runs directly from mains power
- 13 W maximum draw keeps energy use low
- 33 dB-A at 50 Hz for quiet operation
- Ball bearing rated for long service life
Špecifikácie
Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.
Otázky k tomuto produktu
Will the 92x92x25mm frame and 25cm leads fit my legacy 92mm mounting points and reach the existing AC terminal block?
The fan uses a 92x92x25mm black-painted aluminium frame with standard corner holes and 25cm lead wires, matching common 92mm cut-outs and terminal blocks in older enclosures.
How can I verify the 2250-2700 RPM ball-bearing fan is running correctly after wiring it to 220-240V AC?
Measure 2250-2700 RPM at 50/60 Hz and listen for 33-37 dB-A; steady airflow of 0.89-1.05 m³/min confirms the imported ball bearing is operating normally.
Does the 9225 ship with a power cord, mounting screws or a retail box, or must I source them separately?
The unit comes as a bare fan with 25cm leads only — no power cord, screws or individual retail box; 50 units share one plain cardboard case.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



