Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Eight white G1/4 compression fittings with diamond knurl for 10x13mm tubing

FormulaMod

FormulaMod G1/4" Compression Fitting 10x13mm White 8 Pack

SKU CH-8H3F-GQKFQ

Eight G1/4" brass compression fittings for 10x13mm soft tubing with diamond-textured grip

  • TypeFittings

Option White

  • Secure leak-free loops with G1/4" threads for 10x13mm soft tubing
  • Durable H59 brass construction resists corrosion in liquid cooling systems
  • Diamond-textured collars improve grip during installation and maintenance
  • Eight fittings per pack cover multi-block custom loop builds
  • Compression design seals 3/8" ID × 1/2" OD tubing without clamps

G1/4" Compression Fittings for 10x13mm Soft Tube

This eight-pack of FormulaMod compression fittings connects 10x13mm soft tubing to any component with a G1/4" thread. The H59 brass bodies and diamond-textured collars give a secure, leak-free seal without tools. They suit builders assembling or expanding a custom water-cooling loop.

Upgrading from push-fit or barb fittings

Compression collars grip the tube OD mechanically, removing the risk of pop-off that push-fit rings can allow under pressure cycles. The diamond knurl lets you tighten by hand to a repeatable torque, so you avoid the overtightening that cracks acrylic tops or strips soft-threaded blocks.

Sustained loop pressure and thermal cycling

H59 brass resists the stress-corrosion that can develop when coolant chemistry shifts over months of continuous operation. The compression design maintains clamp load as tubing relaxes with heat, so seal integrity holds through daily warm-up and cool-down cycles without re-torquing.

Prednosti

  • Secure leak-free loops with G1/4" threads for 10x13mm soft tubing
  • Durable H59 brass construction resists corrosion in liquid cooling systems
  • Diamond-textured collars improve grip during installation and maintenance
  • Eight fittings per pack cover multi-block custom loop builds
  • Compression design seals 3/8" ID × 1/2" OD tubing without clamps

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What tube dimensions does the G1/4" fitting accept?

The fitting is made for 10x13mm soft tube, which matches 3/8" inner diameter and 1/2" outer diameter.

Which step is often missed when installing the compression ring?

Slide the compression collar onto the tube before pushing the tube over the barbed base, then tighten the collar by hand plus a quarter turn with a spanner.

When should the O-rings inside these brass fittings be replaced?

Inspect the O-rings whenever the loop is drained; replace any that show flattening, cracking or loss of elasticity to prevent leaks.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.