Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four low-profile silver DDR3 memory modules with black heat spreaders

G.SKILL

G.SKILL F3-2400C11Q-32GAB 32GB (4×8GB) DDR3 2400 CL11 desktop RAM

SKU CH-THMT-BTAJ2 MPN F3-2400C11Q-32GAB

A 32 GB quad-channel DDR3 kit running at 2400 MT/s with CL11 timings and a 3.2 cm low-profile heat spreader for large CPU coolers

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 2400 (PC3 19200)
  • CAS LatencyCL11
  • Timing11-13-13-31
  • Voltage1.65V
  • ECCNo
  • 32 GB quad-channel kit expands total memory capacity
  • DDR3 2400 speed delivers up to 19.2 GB/s bandwidth per channel
  • CL11 11-13-13-31 timing ensures responsive system performance
  • Low-profile 3.2 cm heat spreader fits under large CPU coolers
  • Intel XMP 1.3 support simplifies overclocking setup

G.SKILL Ares 32GB DDR3 2400 quad-channel kit

This 32GB kit contains four 8GB DDR3 modules rated at 2400MHz with CL11 11-13-13-31 timings. It runs at 1.65V and includes Intel XMP 1.3 profiles for automatic configuration. The low-profile heat spreader measures 3.2cm tall to clear large CPU coolers.

Suited for DDR3 quad-channel platforms needing 32GB

Builders upgrading a compatible quad-channel desktop with four free slots will match the rated 19.2GB/s per channel bandwidth. Systems limited to dual-channel architecture, boards that do not support 1.65V DDR3, or users requiring ECC or registered memory should choose a different kit.

1.65V operating voltage determines platform fit

The modules require a motherboard and CPU memory controller rated for 1.65V DDR3 operation. If the platform specifies a lower maximum voltage the kit will not run at its rated 2400MHz CL11 settings and a lower-voltage alternative is needed.

Prednosti

  • 32 GB quad-channel kit expands total memory capacity
  • DDR3 2400 speed delivers up to 19.2 GB/s bandwidth per channel
  • CL11 11-13-13-31 timing ensures responsive system performance
  • Low-profile 3.2 cm heat spreader fits under large CPU coolers
  • Intel XMP 1.3 support simplifies overclocking setup

Špecifikácie

BrandG.SKILL
SeriesAres Series
ModelF3-2400C11Q-32GAB
Capacity32GB (4 x 8GB)
SpeedDDR3 2400 (PC3 19200)
CAS LatencyCL11
Timing11-13-13-31
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
Heat SpreaderYes
FeaturesLow profile heat spreader for better compatibility with extra large CPU coolers
Compatible with 3rd & 4th Generation Intel Core Processors
Intel XMP 1.3 support
Please check gskill.com for motherboard compatibility chart.
To reach rated memory speed, enabling Intel XMP profile or manual BIOS tuning is required
Prepravná hmotnosť0.20 kg
Rozmery balenia203 × 152 × 22 mm

Otázky k tomuto produktu

What is included in the box and do I need to buy anything else?

The kit contains four 8 GB DDR3 modules with low-profile heat spreaders; no extra cables or brackets are required.

Why choose the 32 GB quad-channel kit instead of a smaller set?

Four matched 8 GB sticks give 32 GB total and enable quad-channel bandwidth on supported platforms, whereas a dual-channel kit would only populate two slots.

What does the 2400 MHz rating mean once the memory is installed?

At 2400 MHz the modules deliver up to 19.2 GB/s bandwidth per channel with CL11 11-13-13-31 timings at 1.65 V when XMP 1.3 is enabled.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.