Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two red aluminium heatspreader DDR4 modules side by side

G.SKILL

G.SKILL Ripjaws V F4-3600C19D-32GVRB 32GB (2x16GB) DDR4 3600 CL19 desktop RAM

SKU CH-08YZ-PT1PR MPN F4-3600C19D-32GVRB

A 32 GB dual-channel DDR4 3600 kit with CL19 timing and a 42 mm red heatspreader for Intel Z590, Z490, Z390, Z370 and Z270 platforms

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3600 (PC4 28800)
  • CAS LatencyCL19
  • Timing19-20-20-40
  • Voltage1.35V

Capacity 32GB (2 x 16GB)

Speed DDR4 3600 (PC4 28800)

CAS Latency · Color · Fan Included CL19 · Red · No

  • Dual-channel 32 GB kit gives ample capacity for multitasking
  • DDR4 3600 speed with CL19 latency delivers responsive performance
  • 35 V operation balances speed and power efficiency
  • Intel XMP 2.0 profile enables one-click overclock setup
  • 42 mm low-profile heatspreader clears most large CPU coolers

Ripjaws V DDR4 3600 Kit

This 32GB dual-channel kit contains two 16GB unbuffered modules rated for DDR4 3600 with CL19 timing at 1.35V. It targets Intel Z590 through Z270 platforms and uses Intel XMP 2.0 to apply the rated speed automatically.

Sustained Load Behaviour

The aluminum heatspreader dissipates heat during extended gaming, rendering or data-processing sessions, helping the modules maintain the programmed 19-20-20-40 timings without throttling. Validation on major motherboard brands confirms stable operation over long workloads.

DDR4 Interface Limits

The 288-pin DDR4 interface tops out at the kit's 3600 MT/s rating, so bandwidth cannot exceed the PC4 28800 specification. Mixing this matched kit with other modules is not supported and can prevent the XMP profile from engaging.

Prednosti

  • Dual-channel 32 GB kit gives ample capacity for multitasking
  • DDR4 3600 speed with CL19 latency delivers responsive performance
  • 35 V operation balances speed and power efficiency
  • Intel XMP 2.0 profile enables one-click overclock setup
  • 42 mm low-profile heatspreader clears most large CPU coolers

Špecifikácie

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3600C19D-32GVRB
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 3600 (PC4 28800)
CAS LatencyCL19
Timing19-20-20-40
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorRed
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseIntel Z590 / Z490 / Z390 / Z370 / Z270
Prepravná hmotnosť0.13 kg
Rozmery balenia204 × 132 × 19 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the 1.35V DDR4 3600 kit run hot or loud during all-day workloads?

The modules use a 42mm aluminium heatspreader with no moving parts, so they add no fan noise and stay cool under continuous load.

What motherboard slot and CPU platform must I already have for this dual-channel kit to work?

You need a board with 288-pin DDR4 slots and a compatible Intel Z590, Z490, Z390, Z370 or Z270 chipset to enable the XMP 2.0 profile.

Can I keep my existing DDR4 sticks and add this 2x16GB CL19 kit alongside them?

The manufacturer advises against mixing memory kits; matched kits are validated together, so combining different modules can prevent the XMP 2.0 profile from loading correctly.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.