NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
GIGABYTE
GeForce RTX 4080 graphics card with 16 GB GDDR6X memory, 9728 CUDA cores and a 2520 MHz boost clock on a PCIe 4.0 x16 interface
The GIGABYTE EAGLE OC GeForce RTX 4080 16GB graphics card targets users who need high frame rates at 4K and fast GPU compute for rendering workloads. It ships with 9728 CUDA cores and a 2520 MHz boost clock, slightly above the reference 2505 MHz specification. The 16 GB GDDR6X frame buffer runs at 22.4 Gbps across a 256-bit bus.
Under continuous heavy utilisation the card draws enough power to require an 850W power supply unit and a single 16-pin connector. The triple-fan cooler on the 342 mm long ATX board moves heat away from the GPU and memory during extended gaming or compute sessions. Stable clocks are maintained when the chassis airflow matches the thermal design limits.
The 16 GB GDDR6X memory capacity is the single specification that determines whether this model suits a 4K gaming or professional workflow. Larger texture pools and higher resolution assets fit in the frame buffer without spilling to system memory. If the target workload needs more than 16 GB, a different tier is required.
Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.
The card is built for a suggested 850 W power supply and draws power through a single 16-pin connector, so thermal output scales with that power envelope; actual fan noise depends on the cooler curve you set.
An 850 W PSU with a native 12VHPWR 16-pin cable is recommended, and your case must accept a 342 mm long, 150 mm wide, 70 mm thick ATX card.
The card runs at PCIe 4.0 x16 but is backward compatible with PCIe 3.0 slots, and the three DisplayPort 1.4a plus one HDMI 2.1a ports drive legacy displays at their native resolutions.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?