Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black compact Micro ATX and Mini ITX chassis with top vent for 240mm radiator, front USB3.0 USB2.0 audio ports

Gintol

Gintol Micro ATX Mini ITX PC Case Black 240mm Watercooling Support

SKU CH-P9Q4-WTYMJ

A compact Micro ATX and Mini ITX chassis with top-mounted 240 mm water-cooling support, room for a 285 mm graphics card, one 3.5 inch drive plus one 2.5 inch drive, and front USB 3.0.

  • Motherboard CompatibilityMicro ATX
  • ColorBlack
  • Case MaterialABS / Iron / SGCC
  • TypeThe motherboard supports: Micro ATX and Mini ITX
  • Power SupplyATX
  • With Power SupplyATX
  • Fits Micro ATX and Mini ITX boards in a compact 298×195×387 mm frame
  • Top mount takes two 120 mm fans or a 240 mm radiator for liquid cooling
  • CPU cooler clearance up to 160 mm keeps high-performance air towers viable
  • Graphics cards up to 285 mm long install through four PCI slots
  • One 3.5″ HDD and one 2.5″ SSD plus front USB 3.0, USB 2.0 and HD audio

Micro ATX Mini ITX Case

The Gintol chassis fits Micro ATX and Mini ITX motherboards in a compact 298 by 195 by 387 mm frame. Black ABS iron and SGCC panels give a clean look for desk or shelf builds. An ATX power supply up to 160 mm long mounts in a dedicated compartment. Front I/O provides USB 3.0 and USB 2.0 ports plus HD audio.

Who this suits and who should look elsewhere

Builders wanting a small footprint with 240 mm top mount water cooling support and room for a 285 mm graphics card will fit well. Buyers who need more than one 3.5 inch drive bay or multiple 2.5 inch SSD mounts should look elsewhere. Systems requiring a front LCD panel or side air duct are not supported by this design.

240 mm water cooling clearance

The top panel accepts two 120 mm fans or a 240 mm radiator with a 160 mm height limit. This single clearance figure decides whether your chosen liquid cooler will install without modification.

Prednosti

  • Fits Micro ATX and Mini ITX boards in a compact 298×195×387 mm frame
  • Top mount takes two 120 mm fans or a 240 mm radiator for liquid cooling
  • CPU cooler clearance up to 160 mm keeps high-performance air towers viable
  • Graphics cards up to 285 mm long install through four PCI slots
  • One 3.5″ HDD and one 2.5″ SSD plus front USB 3.0, USB 2.0 and HD audio

Špecifikácie

Motherboard CompatibilityMicro ATX
ColorBlack
Case MaterialABS / Iron / SGCC
TypeThe motherboard supports: Micro ATX and Mini ITX
Power SupplyATX
With Power SupplyATX
PSU Main Connector20+4Pin
With front LCD displayno
Front PortsI/O interface USB3.0*1+USB2.0*1+HD AUDIO
120mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
Side Air ductNo
40mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
60mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
70mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
80mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
90mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
140mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
180mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
200mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
220mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
230mm Fanscooling system:Top mounted: 120mm * 2 (optional)/Supports 240 watercooling (optional)
Max GPU LengthPCI expansion slot 4Graphics card supports s 285mm
Max CPU Cooler HeightThe height limit of the radiator is s 160mm
Max PSU LengthPower supply length limit s 160mm

Otázky k tomuto produktu

Will my Micro ATX motherboard and ATX power supply fit inside the 298 x 195 x 387 mm chassis?

Yes. The case accepts Micro ATX and Mini ITX boards and standard ATX power supplies up to 160 mm long.

Can I keep my 285 mm graphics card and 3.5-inch hard drive when moving to this case?

The four PCI slots clear cards up to 285 mm, and the drive cage holds one 3.5-inch HDD plus one 2.5-inch SSD.

How do I confirm the top-mounted 240 mm radiator is circulating coolant after installation?

Feel the two 120 mm top fans for exhaust airflow and watch coolant movement through the clear tubing while the pump runs.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.