Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular M.2 2280 NVME SSD with black graphene heatsink and gold edge connector

GUDGA

GUDGA GVY 1TB M.2 2280 PCIe 3.0x4 NVME internal SSD with Heatsink

SKU CH-JDF2-FN3K1

1 TB M.2 2280 NVMe PCIe 3.0 x4 drive with 3D TLC NAND, up to 3300 MB/s read and 2700 MB/s write, plus a graphene heatsink

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Memory Components3D TLC
  • InterfacePCI-Express 3.0 x4
  • ProtocolNVMe 1.3

Options 1TB

  • Up to 3300 MB/s read for rapid boot and game loading
  • Up to 2700 MB/s write for swift file transfers and installs
  • PCIe 3.0 x4 NVMe interface keeps data moving without bottleneck
  • 3D TLC NAND delivers reliable endurance for daily workloads
  • Graphene heat-dissipation patch maintains steady performance under load

GUDGA GVY 1TB PCIe 3.0 x4 NVMe SSD

This GUDGA GVY drive is a 1 TB internal solid-state drive built for consumer PCs, desktops and laptops. It uses the M.2 2280 form factor and connects through a PCI-Express 3.0 x4 interface running the NVMe 1.3 protocol. A graphene heat-dissipation patch is included to help manage operating temperatures.

PCIe 3.0 x4 bandwidth ceiling

The PCIe 3.0 x4 link caps sequential throughput at the drive’s rated 3300 MB/s read and 2700 MB/s write. Real-world speeds will sit at or below these figures because the interface cannot deliver more bandwidth than the 3.0 specification allows. Workloads that demand higher sustained transfer rates would need a PCIe 4.0 or 5.0 platform.

3D TLC NAND endurance and capacity

The drive stores data on 3D TLC flash, balancing cost, density and write endurance for typical consumer workloads. Its 1 TB capacity sets the total space available for operating systems, applications and game libraries. Buyers should match that capacity against their storage needs before purchasing.

Prednosti

  • Up to 3300 MB/s read for rapid boot and game loading
  • Up to 2700 MB/s write for swift file transfers and installs
  • PCIe 3.0 x4 NVMe interface keeps data moving without bottleneck
  • 3D TLC NAND delivers reliable endurance for daily workloads
  • Graphene heat-dissipation patch maintains steady performance under load

Špecifikácie

BrandGUDGA
SeriesGVY
ModelGVY-XXX-2280
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Memory Components3D TLC
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
HeatSinkwith HeatSink
Manufacturer RecertifiedYes

Ďalšie verzie tohto modelu

Ďalších 2 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Should I pick the 1TB GVY or a different capacity?

The GVY series is offered in multiple capacities; choose the size that matches the space you need for applications and games.

What does the 3300MB/s read figure mean once the drive is installed?

It is the maximum sequential read speed the controller can reach over a PCIe 3.0 x4 link; real-world boot and load times will be lower but still far quicker than a hard drive.

How does the PCIe 3.0 x4 interface cap performance in practice?

The four-lane Gen 3 connection limits the theoretical ceiling to about 3300MB/s read and 2700MB/s write, so the drive cannot exceed those bounds even if the NAND is faster.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.