Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular silver ATX power supply, reduced depth, single fan visible

Gulfe

Gulfe ATX Power Supply 5.9" Depth 24-Pin 3 SATA 2.5kg

SKU CH-JRJ9-RZJYB

ATX power supply with reduced 5.9" depth, 24-pin connector, three SATA connectors and over-current protection

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX form factor fits standard cases
  • Reduced 5.9" depth improves compatibility in tight builds
  • 24-pin ATX plus 4-pin CPU and three SATA connectors included
  • Over-current and over-power protection safeguards components
  • 115/230 V input supports worldwide mains voltage

Reduced-depth ATX power supply

This Gulfe ATX unit measures 5.9 inches deep and weighs 2.5 kg, making it suitable for compact cases where standard-length supplies do not fit. It is intended as a direct replacement for HP Pavilion P7-1019 and P7-1023 desktop computers. The single-fan design provides cooling within the reduced chassis. It supports AC input voltages of 115 V and 230 V.

Connector complement and voltage rails

The supply delivers +3.3 V, +5 V, -5 V, +12 V on two independent rails, -12 V and +5 V standby outputs. It includes one 24-pin ATX connector, one 4-pin P4 12 V connector, three SATA 15-pin connectors, two LP4 4-pin connectors and one floppy 4-pin connector. This mix covers the motherboard, CPU auxiliary power, up to three SATA drives and legacy peripherals. Systems requiring additional PCIe power cables or more than three SATA devices cannot be supported.

ATX form-factor limits

The ATX specification defines the physical envelope and the 24-pin main connector used here. Hold-up time is rated at 17 ms minimum at nominal input, and rise time is less than 70 ms. Input frequency range is 47 Hz to 63 Hz. Over-current and over-power protection circuits are built in. Builders needing higher wattage, modular cabling or additional 12 V rails must select a different supply.

Prednosti

  • ATX form factor fits standard cases
  • Reduced 5.9" depth improves compatibility in tight builds
  • 24-pin ATX plus 4-pin CPU and three SATA connectors included
  • Over-current and over-power protection safeguards components
  • 115/230 V input supports worldwide mains voltage

Špecifikácie

BrandGulfe
TypeATX
Fans1
Weight2.5

Otázky k tomuto produktu

Will this 5.9" deep ATX unit fit in the same space as the original power supply in my HP Pavilion P7-1019?

The reduced depth of 5.86 inches by 3.3 inches wide is designed for increased compatibility with older HP Pavilion P7-1019 and P7-1023 chassis where a standard ATX unit may be too long.

How can I verify the unit is delivering stable power to my components after installation?

The supply features over current and over power protection plus a hold-up time of 17 ms minimum at nominal input and a rise time of less than 70 ms, which together help maintain steady +5V, +3.3V and +12V rails under load.

Does the box include the 24-pin ATX, 4-pin CPU and three SATA connectors needed for my build, or must I buy cables separately?

The unit comes with a fixed 24 (20+4) pin ATX connector, one P4 12V 4-pin, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin; no extra cables are required for those connections.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.