Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Red ATX mid-tower case with tempered glass side panel and louvered metal front ventilation

HYTE

HYTE CS-HYTE-X50G-RR Red ATX Mid Tower PC Case

SKU CH-WYV7-DCE0Q MPN CS-HYTE-X50G-RR

A red ATX mid-tower case built from ABS, steel and tempered glass with top-mounted PSU shroud, louvered blade ventilation and support for up to 360 mm of GPU intake airflow

  • TypeATX Mid Tower
  • ColorRed
  • Case MaterialABS / Steel / Tempered Glass
  • Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
  • Dust FiltersBottom
  • Internal 3.5" Drive Bays1

Option Glass (Red)

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Louvers slice hot air for better GPU cooling
  • Top-mounted PSU shroud delivers 360 mm fresh intake to graphics card
  • Laminated acoustic glass dampens sound and resists shattering
  • Supports ATX, E-ATX, Micro-ATX and ITX motherboards
  • Fits CPU coolers up to 180 mm tall

Red Mid-Tower Chassis

The HYTE X50 is a red ATX mid-tower case built from ABS, steel and tempered glass. It accepts ATX, E-ATX, Micro-ATX and ITX motherboards. Seven expansion slots and a single bottom dust filter are included. The design targets builders who want a distinctive look with broad motherboard support.

Louvered Blade Airflow

Louvered blade ventilation uses angled metal instead of punch-outs to create a low-pressure, low-resistance intake path. The top-mounted PSU shroud directs up to 360 mm of fresh air straight to the graphics card. Front, side and rear mounts each take 120 mm fans. The layout keeps thermals steady during long sessions rather than just short bursts.

Curved Glass & Cable Routing

Four-millimetre laminated acoustic glass adds sound dampening and a shatter-proof layer. Curved steel panels and the top PSU shroud let cables hang down with gravity for cleaner routing. Maximum CPU cooler height is 180 mm. One 3.5-inch and two 2.5-inch drive bays provide limited storage, so builders needing more drives should look elsewhere.

Prednosti

  • Louvers slice hot air for better GPU cooling
  • Top-mounted PSU shroud delivers 360 mm fresh intake to graphics card
  • Laminated acoustic glass dampens sound and resists shattering
  • Supports ATX, E-ATX, Micro-ATX and ITX motherboards
  • Fits CPU coolers up to 180 mm tall

Špecifikácie

BrandHYTE
ModelCS-HYTE-X50G-RR
TypeATX Mid Tower
ColorRed
Case MaterialABS / Steel / Tempered Glass
Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsFront - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Max CPU Cooler Height180 mm
Prepravná hmotnosť13.52 kg
Rozmery balenia600 × 578 × 345 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How loud does the HYTE X50 get when the front, side and rear 120 mm fans run all day?

The case fits up to seven 120 mm fans, but acoustic output depends on the specific fans you install and their speed curves; the 4 mm laminated glass panel includes a sound-dampening layer to help reduce noise.

What extra parts do I need before the HYTE X50 can power on and show a display?

You must supply a motherboard (ATX, E-ATX, Micro-ATX or ITX), CPU, CPU cooler no taller than 180 mm, graphics card, power supply, memory and storage drives; the case itself provides only the chassis, mounting points and fan positions.

Will my existing 360 mm radiator and full-length graphics card fit together in the HYTE X50?

The top PSU shroud design leaves up to 360 mm of fresh intake space for the GPU, and the case supports 360 mm radiators in the front or side, so a 360 mm radiator and a long graphics card can coexist.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.