Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Snow White mid-tower case with three tempered glass panels and vertical GPU mount

HYTE

HYTE Y70 CS-HYTE-Y70-WW PC case Snow White

SKU CH-9HG3-EPVBF MPN CS-HYTE-Y70-WW

Dual-chamber ATX mid-tower with panoramic tempered glass, vertical GPU mounting up to 422 mm, PCIe 4.0 riser cable included, and extensive radiator support up to 360 mm

  • TypeATX Mid Tower
  • ColorSnow White
  • Case MaterialABS / Steel / Tempered Glass
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Side Panel3 x Sides Tempered Glass Panel
  • Dust FiltersBottom / Side / Top

Options Snow White

  • Panoramic three-sided tempered glass showcases every component
  • Dual-chamber layout separates GPU heat from motherboard tray
  • PCIe 4.0 x16 riser cable included for vertical GPU mounting
  • Cold-floor intake supports three 120 mm or two 140 mm fans up to 32 mm thick
  • Fits 422 mm graphics cards and 360 mm radiators in multiple positions

HYTE Y70 dual-chamber mid-tower

The HYTE Y70 is a dual-chamber ATX mid-tower built from ABS, steel and tempered glass on three sides. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards in a Snow White finish. Front I/O provides two USB-A 3.2 Gen 1 ports, one USB-C 3.2 Gen 2 port and a combo audio jack. The layout separates the graphics card into its own vertical chamber for cleaner cable routing and display.

Vertical GPU mounting with PCIe 4.0 riser

A PCIe 4.0 x16 riser cable and colour-matched canopy are included for four-slot vertical graphics installation up to 422 mm long. The design adds airflow space between the card edge and the glass panel. Half-height expansion cards can sit behind the vertical GPU in the seven half-height slots. This arrangement replaces traditional horizontal mounting and is worth it when you want the GPU on show without sacrificing thermals.

Cooling limits and radiator support

Top and side mounts each accept up to 360 mm or 280 mm radiators, with 68 mm thickness at the top and 125 mm thickness at the side. The bottom chamber fits three 120 mm or two 140 mm fans up to 32 mm thick for direct GPU intake. CPU cooler height is limited to 180 mm and power supply length to 235 mm. Two 3.5-inch and four 2.5-inch drive bays complete the internal storage capacity.

Prednosti

  • Panoramic three-sided tempered glass showcases every component
  • Dual-chamber layout separates GPU heat from motherboard tray
  • PCIe 4.0 x16 riser cable included for vertical GPU mounting
  • Cold-floor intake supports three 120 mm or two 140 mm fans up to 32 mm thick
  • Fits 422 mm graphics cards and 360 mm radiators in multiple positions

Špecifikácie

BrandHYTE
SeriesY70
ModelCS-HYTE-Y70-WW
TypeATX Mid Tower
ColorSnow White
Case MaterialABS / Steel / Tempered Glass
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Side Panel3 x Sides Tempered Glass Panel
Dust FiltersBottom / Side / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays4
Expansion Slots4 Vertical, 7 Half-Height
Front Ports2 x USB-A 3.2 Gen 1, 1 x USB-C 3.2 Gen 2, 1 x Audio,
Fan OptionsTop: 3x120mm or 2x140mm
Side: 3x120mm or 2x140mm
Rear: 1x120 or 1x140mm
Bottom: 3x120mm or 2x140mm Fans up to 32mm thick
Pre-installed FansNo Fan Installed
Radiator OptionsTop: up to 360mm or 280mm long & 68mm thick Radiator
Side: up to 360mm or 280mm long & 125mm thick Radiator
Rear: 120mm or 140mm Radiator
Max GPU Length422 mm
Max CPU Cooler Height180 mm
Max PSU Length235 mm
Dimensions21.8" x 16" x 22.5"
FeaturesDual chamber interior layout so you can showcase the build up front with space to manage cables in the back
4 slot vertical graphics to accommodate even the largest and most powerful of GPUs into your build with ease
Included luxury PCIE 4.0 x 16 riser with a color matched canopy for uninterrupted visual flow
7 half-height horizontal PCIe slots which provide ample room for additional hardware expansion
Seamless L-shaped molded rubber grommet that disappears into the case for a cohesive look
Prepravná hmotnosť12.80 kg
Rozmery balenia559 × 546 × 406 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What clearance does the case give for a vertical GPU and its riser cable?

The dual-chamber layout supports graphics cards up to 422 mm long with four vertical expansion slots and includes a PCIe 4.0 x16 riser cable with a colour-matched canopy.

How do I mount the included PCIe 4.0 riser cable and where do installers go wrong?

Route the riser through the dedicated cutout, seat it firmly in the motherboard's top x16 slot, then secure the GPU to the vertical brackets; the common mistake is leaving the riser loose, which causes signal loss.

Which dust filters need regular cleaning and how are they accessed?

Magnetic filters on the top, bottom and side panels pull out without tools; clean them every few months to keep airflow reaching the GPU cold-floor and radiator mounts.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.