Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black plastic tray converts a 2.5 SATA drive to a 3.5 bay

ICY DOCK

ICY DOCK MB882SP-1S-2B 2.5 to 3.5 SATA HDD SSD converter hdd accessory

SKU CH-2VG3-7HJ33 MPN MB882SP-1S-2B

Converts a 2.5" SATA SSD or HDD into a 3.5" drive bay with tool-less installation and full 6 Gbps speed

  • ColorBlack
  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseSingle Drive
  • Compatible Products2.5"

Model Lite

Option 3.5in SATA Enclosure - 2.5 in SATA/SAS Drive

  • 1 x 3.5in
  • 3.5in SATA Enclosure - 2.5 in SATA/SAS Drive
  • Converts 2.5" SATA drives to fit 3.5" bays
  • Tool-less installation for 9.5mm SATA SSDs and HDDs
  • Supports full SATA 6 Gbps speed with no reduction
  • Added airflow vents keep drives cooler during operation
  • Lightweight design simplifies desktop, media center or server upgrades

2.5 to 3.5 SATA Drive Converter

The ICY DOCK MB882SP-1S-2B converts a single 2.5 inch SATA I, II or III hard drive or solid-state drive into a standard 3.5 inch form factor. It fits any 3.5 inch SATA hard drive bay in desktops, media centres or home servers. The adapter supports drives up to 9.5 mm in height and maintains full SATA 6 Gbps transfer rates without speed reduction. Tool-less installation makes drive swaps quick and straightforward.

Suited for 2.5 inch SATA upgrades

Builders adding a 2.5 inch SATA SSD or HDD to a system that only offers 3.5 inch bays will find this converter a direct fit. It also works for users who want a lightweight, screw-less tray with added airflow vents for cooler operation. The tray does not support drives thicker than 9.5 mm, nor does it adapt SAS-only drives. Buyers needing to mount multiple drives in one bay should consider a different solution.

9.5 mm maximum drive height

The critical specification is the 9.5 mm height limit for the installed 2.5 inch drive. Most standard laptop SATA SSDs and hard drives meet this limit, but some higher-capacity models exceed it and will not fit. The converter passes through the native SATA I, II or III interface up to 6 Gbps, so performance depends entirely on the drive used. No external power or drivers are required beyond the standard SATA connection.

Prednosti

  • Converts 2.5" SATA drives to fit 3.5" bays
  • Tool-less installation for 9.5mm SATA SSDs and HDDs
  • Supports full SATA 6 Gbps speed with no reduction
  • Added airflow vents keep drives cooler during operation
  • Lightweight design simplifies desktop, media center or server upgrades

Špecifikácie

BrandICY DOCK
ModelMB882SP-1S-2B
ColorBlack
Conversion Tray1 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseSingle Drive
Compatible Products2.5"
SpecificationsExternal Interface: SATA
Compatible Drive Type: 2.5" SATA I, II & III HDD & SSD (9.5mm)
Device Fit: 3.5" SATA hard drive bay
Transfer Rate: Up to 6 Gbps
Support HDD Capacity: No Limitation (limited to 9.5mm drive height)
Structure: Plastic
Dimension: 0.98" x 3.98" x 5.71"
Weight: 0.36 lb.
FeaturesConverts your 2.5" SATA I / II / III HDD or SSD to a 3.5" SATA hard drive, for 3.5" SATA drive bay usage
Screw-less and Tool-less
Simple and Lightweight design
Added Airflow Vents
Compatible with most 3.5" SATA HDD enclosures, rackmounts, backplanes
Compatible with Mac
Viewing Window over SATA Connection
Perfect for Power Users, Gamers, and Average Users
Universal mounting holes for any 3.5" drive bay & carrier
Tool-less installation designed specifically for 9.5mm drives
Compatible with 7mm drives (requires manual insertion)
Option3.5in SATA Enclosure - 2.5 in SATA/SAS Drive
Prepravná hmotnosť0.16 kg
Rozmery balenia160 × 114 × 36 mm

Ďalšie verzie tohto modelu

Ďalších 3 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I confirm the converter is delivering full SATA 6 Gbps speed after installing my drive?

The adapter supports SATA I, II and III with no speed reduction, so your drive will run at its rated transfer rate once seated in the tray.

What comes in the box and do I need extra screws or tools for a 9.5 mm drive?

The converter tray is included; 9.5 mm SATA SSDs or HDDs install tool-lessly, while 7 mm drives require manual screw mounting.

Which version should I choose for a 7 mm SSD versus a 9.5 mm HDD?

A single model handles both heights — 9.5 mm drives fit tool-lessly and 7 mm drives are secured with the provided screws.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.