NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
KHACHIMO
Delivers 220 W of 80 PLUS Gold certified ATX power with Modern Standby support, Zero RPM fan mode and resonant LLC topology for quiet, efficient operation
The KHACHIMO AI0 E200 is a 1U form-factor power supply built for dense server chassis. It delivers 220 W of continuous power through a standard ATX connector layout. The unit is new and targets administrators replacing failed modules in compatible rackmount systems.
This supply provides exactly 220 W, so it suits only platforms whose power budget matches that figure. Systems requiring higher or lower wattage will not operate correctly with this module. Verify the chassis power specification before purchase.
Installation consists of sliding the unit into the 1U bay and securing the retention screw; no cable routing inside the chassis is required. The most common issue is a pin-out mismatch on the proprietary edge connector, which prevents the system from posting. Confirm the exact part number DPS-220BB C GW-FLX220A against the service manual before fitting.
| Type | ATX |
|---|
The 220 W rating is the maximum continuous power the unit can deliver to system components. It suits low-power small-form-factor PCs or thin-client replacements where total draw stays below that ceiling.
ATX type means the unit follows the standard ATX pin-out for motherboard and peripheral connectors, so it plugs directly into an ATX motherboard without adapter cables.
The 1U form factor fits standard 1U server or rackmount chassis that accept a 1U redundant or flex-ATX power supply; verify your chassis mounting rails match the unit's screw pattern.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?