Kingston Technology Corp.
Kingston Technology Corp. SNVS/2000G 2TB NVMe internal SSD
M.2 2280 NVMe SSD with 2TB capacity delivering 2100 MB/s read and 1700 MB/s write for thin laptops and small PCs
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- InterfacePCI-Express 3.0 x4 NVMe
- Max Sequential ReadUp to 2100 MBps
- Up to 2100 MB/s read speeds for fast system responsiveness
- Up to 1700 MB/s write speeds accelerate file saves and transfers
- 480 TBW endurance rating supports heavy daily workloads
- Single-sided M.2 2280 design fits thin laptops and small PCs
- Low 5 mW idle power extends battery life in portables
Kingston NV1 2TB M.2 2280 NVMe SSD
This internal solid-state drive uses a PCI-Express 3.0 x4 NVMe interface and a single-sided M.2 2280 form factor. It delivers sequential reads up to 2100 MBps and writes up to 1700 MBps with an endurance rating of 480TBW. The 2.10mm height and 7.00g weight suit thin laptops and small form factor PCs.
Thermals noise and power draw
Idle power consumption sits at 5 mW while active draw averages 340 mW and peaks at 1.1W read or 3.3W write. With no moving parts the drive runs silently in normal use. The operating range of 0°C to 70°C covers typical notebook environments without additional cooling.
Sustained load behaviour
Under continuous workloads the controller manages thermal output within the 70°C limit to maintain performance. Vibration resistance of 2.17G at 7-800 Hz ensures stability during prolonged operation. The 480TBW endurance rating supports heavy daily write cycles over the drive’s lifespan.
Prednosti
- Up to 2100 MB/s read speeds for fast system responsiveness
- Up to 1700 MB/s write speeds accelerate file saves and transfers
- 480 TBW endurance rating supports heavy daily workloads
- Single-sided M.2 2280 design fits thin laptops and small PCs
- Low 5 mW idle power extends battery life in portables
Špecifikácie
| Brand | Kingston |
|---|---|
| Series | NV1 |
| Model | SNVS/2000G |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Interface | PCI-Express 3.0 x4 NVMe |
| Max Sequential Read | Up to 2100 MBps |
| Max Sequential Write | Up to 1700 MBps |
| Features | Endurance: 480TBW Offers read/write speeds up to 2,100/1,700 MB/s Easily integrate into designs with M.2 connectors. Perfect for thin laptops and small form factor PCs Available in a range of capacities up to 2TB to meet your data storage requirements |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | 340 mW Avg / 1.1W (MAX) Read / 3.3W (MAX) Write |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Vibration Resistance | Operating: 2.17G (7-800 Hz) Non-operating: 20G (20-1000 Hz) |
| Height | 2.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| Prepravná hmotnosť | 0.02 kg |
| Rozmery balenia | 180 × 128 × 9 mm |
Otázky k tomuto produktu
How do I install the M.2 2280 NVMe drive and which step is often missed?
Insert the drive at an angle into the PCIe 3.0 x4 slot, press it flat, and secure it with the motherboard screw; the step often missed is fastening that screw, which keeps the single-sided 2.10 mm PCB from lifting.
What maintenance or replacement will the 2 TB NV1 need later?
No routine maintenance is required; the drive is rated for 480 TBW of writes, so replacement is only needed if that endurance limit is reached or a hardware fault occurs.
What limit appears first under sustained heavy writes on this PCIe 3.0 x4 SSD?
The sequential write speed caps at 1700 MB/s, and the controller will throttle once the 70 °C operating temperature ceiling is hit during prolonged workloads.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
