Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 2U rack power supply, 12.8 by 12.05 by 5.08 inches, ten connectors

Lemincrash

Lemincrash 2000W 2U Mining Power Supply 110V 10 Connectors

SKU CH-NRRM-7QTBA

A 2U mining power supply delivering 1800 W at 110 V or 2000 W at 220 V with ten connectors and automatic protection shutdown

  • TypeProprietary Power Supply
  • Delivers 2000 W at 220 V input for high-density mining rigs
  • Provides 1800 W at 110 V input where 220 V is unavailable
  • Ten connectors power multiple Antminer S9, L3++, Z9 mini, Z9, D9, T9 units
  • Automatic shutdown on circuit fault or over-temperature protects attached miners
  • 2U form factor fits standard racks measuring 12.8 in × 12.05 in × 5.08 in

2U Mining Power Supply 2000W

This proprietary 2U power supply is built for cryptocurrency mining rigs that require dense, high-current delivery. It targets operators running Antminer S9, L3++, Z9 mini, Z9, D9 or T9 units who need ten dedicated connectors in a rack-mount form factor.

110V Input Limits Output to 1800W

At 110 V the unit delivers 1800 W and 150 A; at 220 V it reaches the full 2000 W and 166 A. The 110 V ceiling means North American circuits without 220 V service cannot access the rated peak, and the loud high-volume fan makes the supply unsuitable for quiet or residential environments.

Replaces Lower-Wattage or Fewer-Connector Units

The ten-connector layout and dual-voltage scaling replace supplies that offer fewer leads or cap out below 1800 W at 110 V. The upgrade is worth it when a rig demands simultaneous power for multiple hash boards and the operator can provide 220 V for maximum headroom.

Prednosti

  • Delivers 2000 W at 220 V input for high-density mining rigs
  • Provides 1800 W at 110 V input where 220 V is unavailable
  • Ten connectors power multiple Antminer S9, L3++, Z9 mini, Z9, D9, T9 units
  • Automatic shutdown on circuit fault or over-temperature protects attached miners
  • 2U form factor fits standard racks measuring 12.8 in × 12.05 in × 5.08 in

Špecifikácie

TypeProprietary Power Supply

Otázky k tomuto produktu

Should I run this unit at 110 V or 220 V for my Antminer S9?

At 110 V it delivers 1800 W and 150 A; at 220 V it delivers 2000 W and 166 A, so the higher voltage gives more headroom for the same miner.

What does the 2000 W rating actually provide inside the chassis?

The 2000 W figure is the peak output at 220 V input, supplying up to 166 A on the 12 V rail to power hash boards and controller simultaneously.

How many 6-pin or 8-pin leads does the 10-connector cable set include?

The PSU ships with ten proprietary connectors designed for Antminer S9, L3++, Z9 mini, Z9, D9 and T9 hash boards.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.