Lian Li UF-SL120-1B 120mm ARGB case fan black single
- 1 Fan
- No Controller
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Lian Li
Three white 120 mm ARGB case fans with controller, 800–1900 RPM, 58.54 CFM airflow and 31 dB(A) maximum noise
Model 800 - 1900 RPM
The Lian Li UF-SL120-3W ships as a trio of 120mm case fans in a white finish. Each unit runs at 800 to 1900 RPM and moves 58.54 CFM of air while keeping noise at 31 dB(A) maximum. The 25mm thickness fits standard mounting points and the pack includes a controller for unified lighting and speed management. Builders planning a clean white theme with addressable RGB get a matched set in one box.
Swapping a handful of mismatched coolers for this three-fan kit removes cable clutter and synchronises ARGB effects through the supplied controller. The jump is worth it when you want consistent 120mm spacing, identical 58.54 CFM performance across all positions and a single software point for colour curves. If your current fans already share PWM control and a common ARGB header, the upgrade adds only aesthetic unity.
Verify that your board offers a 5V ARGB header and enough PWM or DC fan headers for the controller daisy-chain. Confirm the chassis can accept 120mm by 120mm by 25mm fans at every intended mount — front, top or rear — without fouling radiators, drive cages or tall memory modules. The white blades and frame show dust more readily, so plan a cleaning routine if the system runs in a high-particulate environment.
| Brand | Lian li |
|---|---|
| Model | UF-SL120-3W |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| RPM | 800 ~ 1900 RPM |
| Air Flow | 58.54 CFM |
| Noise Level | 31dB(A) Max |
| Color | White |
| LED | ARGB |
| Dimensions | 120.00 x 120.00 x 25.00 mm |
| Prepravná hmotnosť | 0.79 kg |
| Rozmery balenia | 160 × 146 × 95 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Each fan measures 120 mm square by 25 mm thick so verify your case allows at least 25 mm clearance per mounting position
Connect each fan to the next using the built-in interlocking ports then plug the lead fan into the controller — skipping a link breaks the signal chain
Dust the blades every few months; replace only if bearing noise rises above the rated 31 dB(A) maximum after cleaning
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?