Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board memory module with gold edge connector and black chips

Micron Technology, Inc.

Micron Technology, Inc. MT16JTF51264AZ-1G4M1 4GB DDR3-1333 CL9 1.50V Dual Channel Kit Green desktop RAM

SKU CH-G8F7-GDMV0

Dual-channel 4 GB DDR3 kit running at 1333 MHz with CL9 latency at 1.50 V

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 4 GB capacity doubles system memory for smoother multitasking
  • DDR3 1333 speed delivers 10600 MT/s data rate for responsive performance
  • CL9 latency reduces access delay for faster application response
  • 50 V standard voltage ensures broad motherboard compatibility
  • Dual-channel kit enables matched-pair bandwidth for improved throughput

4GB DDR3 Dual Channel Kit

This Micron desktop memory kit provides 4GB of DDR3-1333 capacity across two unbuffered modules. It suits owners of older DDR3 platforms who need a basic capacity upgrade for everyday computing tasks. The green PCB modules operate at standard JEDEC voltage without additional configuration. Buyers who want more storage or faster speeds should look elsewhere.

Standard voltage and no heat spreader

Running at 1.50V, the kit draws typical power for DDR3-1333 operation and produces modest heat without a spreader. The CL9 latency at 1333MHz delivers standard timing for this generation. Fan airflow in a normal chassis is sufficient to keep temperatures in check during typical workloads. No LED lighting means silent, distraction-free running.

DDR3-1333 CL9 specification

The decisive figure is the DDR3-1333 (PC3-10600) rating with CL9 latency, which must match the motherboard's supported memory standard. If the board requires a different DDR generation, higher speed or lower latency, these modules will not be compatible. Verify the platform's qualified vendor list before purchase.

Prednosti

  • 4 GB capacity doubles system memory for smoother multitasking
  • DDR3 1333 speed delivers 10600 MT/s data rate for responsive performance
  • CL9 latency reduces access delay for faster application response
  • 50 V standard voltage ensures broad motherboard compatibility
  • Dual-channel kit enables matched-pair bandwidth for improved throughput

Špecifikácie

BrandMicron
ModelMT16JTF51264AZ-1G4M1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMicron Chipset
ColorGreen
Heat SpreaderNo
LED ColorNone

Otázky k tomuto produktu

How do I install the dual-channel kit in my motherboard slots, and which step is often missed?

Insert both 4GB modules into the paired slots — usually the same-coloured ones — then press until the retention clips click; the step often missed is seating the second module with equal force so both locks engage fully.

What maintenance or replacement will the unbuffered DDR3 modules need over time?

No scheduled maintenance is required; if errors appear, run a memory test and replace the faulty stick — the green PCB has no heat spreader, so keep case airflow clear to avoid thermal throttling.

What limit appears first during sustained heavy workloads on this CL9 1.50V kit?

The CL9 latency at 1333 MT/s becomes the bottleneck before voltage or temperature, capping sustained throughput at the rated PC3-10600 bandwidth.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.