Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular aluminium power supply, IP67 rated, 245 by 69 by 43 mm

myVolts

myVolts LPV-200-12 200W 12V 16.5A IP67 power supply

SKU CH-88GM-WM3DN MPN LPV-200-12

IP67-rated 200W 12V 16.5A supply in an aluminium alloy case with short-circuit, overload, over-voltage, over-current and over-temperature protection for LED strips, bulbs.

  • TypeAT
  • Outdoor-ready with IP67 protection against dust and water
  • Aluminium alloy housing dissipates heat for stable operation
  • Built-in safeguards against short circuit, overload, over voltage, over current and over temperature
  • Delivers 200 W at 12 V with up to 16.5 A output current
  • Wide 180-264 V AC input suits industrial and LED lighting projects

IP67 200W 12V power supply

The myVolts LPV-200-12 delivers 200W at 12V with up to 16.5A output current. Its IP67-rated aluminium alloy enclosure protects against dust and water ingress for outdoor and industrial installations. The unit operates from 180-264V AC input and functions across a 30 to 60 Celsius working temperature range. It suits LED strips, bulbs, computer projects and industrial equipment.

AC input limits and protection

The supply accepts 180-264V AC only, so it cannot be used on lower-voltage mains without a suitable transformer. Built-in safeguards cover short circuit, overload, over voltage, over current and over temperature conditions. Ripple and noise is specified at 100mvp-p while efficiency reaches 81 percent. The aluminium housing provides passive cooling without a fan.

16.5A headroom for LED and industrial loads

At 12V the 16.5A maximum gives 200W continuous capacity for LED arrays, lighting systems and control gear. Loads that draw significantly more than 16.5A or require a different output voltage will exceed the unit's capability. The IP67 rating and wide temperature range allow deployment in exposed locations where lesser supplies would fail.

Dimensions 245 x 69 x 43mm

The compact aluminium case measures approximately 245 by 69 by 43 millimetres. This form factor fits tight enclosures and mounting spaces common in industrial and lighting applications. No fan noise is generated, making it suitable for noise-sensitive environments. The package includes the power supply unit only.

Prednosti

  • Outdoor-ready with IP67 protection against dust and water
  • Aluminium alloy housing dissipates heat for stable operation
  • Built-in safeguards against short circuit, overload, over voltage, over current and over temperature
  • Delivers 200 W at 12 V with up to 16.5 A output current
  • Wide 180-264 V AC input suits industrial and LED lighting projects

Špecifikácie

TypeAT

Otázky k tomuto produktu

Should I pick the 12V 16.5A version or a different voltage model?

This model delivers a fixed 12V DC output at up to 16.5A for 200W total. Choose it when your LED strips, bulbs or industrial gear are rated for 12V and the combined draw stays within 16.5A.

What does the 200W rating mean once the unit is installed?

It means the supply can continuously provide 12V at up to 16.5A (200W) while staying within its 81% efficiency and 100mV ripple spec, as long as ambient temperature stays between -30°C and +60°C.

What does the IP67 rating actually protect against in daily use?

IP67 means the aluminium enclosure is dust-tight and survives temporary immersion in water, so rain, splashes or hose-downs in outdoor or industrial settings will not penetrate the housing.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.