BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277761BTC
Skladom
NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Dell PowerEdge R660
Eight-module 128 GB DDR5 kit at 4800 MT/s with ECC registered RDIMMs for Dell PowerEdge R660
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- 128 GB total capacity across eight 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- CL40 latency with 1.10 V operating voltage
- ECC registered RDIMM for error-correcting server reliability
- Validated for Dell PowerEdge R660 rack server compatibility
Dell PowerEdge R660 Memory Kit
This 128 GB kit contains eight 16 GB DDR5 RDIMM modules built for the Dell PowerEdge R660 server. Registered ECC design with 1Rx8 organisation protects data integrity in mission-critical workloads. Modules run at 4800 MT/s with CL40 latency at 1.1 V.
Suited for R660 capacity upgrades
IT teams expanding a PowerEdge R660 to 128 GB across eight slots will match the platform’s validated configuration. Systems requiring a different module count, lower density per DIMM, or non-ECC memory should select another kit.
Registered ECC with 1Rx8 organisation
The single-rank registered ECC layout is the specification that determines compatibility with the R660 memory controller. Verify the server’s qualified-vendor list calls for 1Rx8 RDIMMs before ordering.
Prednosti
- 128 GB total capacity across eight 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- CL40 latency with 1.10 V operating voltage
- ECC registered RDIMM for error-correcting server reliability
- Validated for Dell PowerEdge R660 rack server compatibility
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Otázky k tomuto produktu
Does this kit need a Dell PowerEdge R660 motherboard with 288-pin DDR5 slots to operate?
Yes, the 8 x 16 GB modules use the 288-pin DDR5 RDIMM form factor and are validated for the PowerEdge R660 platform.
Can I mix these 1Rx8 CL40 modules with existing DDR5 RDIMMs of a different rank or latency in the same server?
Mixing ranks or CAS latencies is not recommended; the R660 memory controller expects identical 1Rx8 CL40 modules for stable operation.
How do I verify the kit is running at the rated 4800 MT/s with ECC active after installation?
Check the system BIOS or iDRAC interface — it will report 4800 MT/s, CL40, 1.10 V and ECC enabled for each of the eight modules.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
