Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB 8x16GB DDR5 4800 CL40 1Rx8 ECC RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-P1GK-6HYJS

128 GB registered ECC DDR5 kit in eight 16 GB modules at 4800 MT/s, CL40, 1.1 V, validated for the Supermicro H13DSG-OM motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Zobraziť ďalších 30 konfigurácií
  • 128 GB kit keeps all eight channels populated at rated speed
  • DDR5-4800 CL40 timing matches the board's memory controller spec
  • Registered ECC architecture corrects single-bit errors before they reach production
  • 1Rx8 1.1 V modules fit the H13DSG-OM 288-pin RDIMM slots exactly
  • Lifetime replacement warranty and free US-based technical support included

128GB DDR5 RDIMM kit for Supermicro H13DSG-OM

This 128GB kit contains eight 16GB DDR5 4800 RDIMM modules built to the exact rank, voltage and timing the Supermicro H13DSG-OM memory controller expects. Each module is a 1Rx8 registered ECC DIMM running at 1.10V with CL40 latency. The 288-pin form factor matches the board's registered DIMM slots so the system recognises the full capacity at rated speed.

Capacity and headroom with eight 16GB modules

Fully populating the supported slots delivers 128GB of registered ECC memory for multi-socket workloads, virtualisation hosts and database buffers that benefit from maximum DIMM density. The registered architecture offloads the memory controller so every slot runs fully populated at DDR5 4800 without signal degradation. Workloads that exceed 128GB or need higher frequencies than PC5 38400 will require a different platform or memory configuration.

Build fit: registered ECC, 1.10V, 288-pin RDIMM

The kit uses the registered RDIMM form factor this motherboard requires, not UDIMM or SODIMM. Installation must follow the board's validated population order to initialise correctly. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots in production. Systems needing unbuffered memory, non-ECC modules or a different pin count cannot use this kit.

Prednosti

  • 128 GB kit keeps all eight channels populated at rated speed
  • DDR5-4800 CL40 timing matches the board's memory controller spec
  • Registered ECC architecture corrects single-bit errors before they reach production
  • 1Rx8 1.1 V modules fit the H13DSG-OM 288-pin RDIMM slots exactly
  • Lifetime replacement warranty and free US-based technical support included

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will these 1Rx8 registered DIMMs work with the existing memory slots on my Supermicro H13DSG-OM motherboard?

Yes, the 288-pin RDIMM form factor matches the slots on the Supermicro H13DSG-OM. The kit is spec-matched to the board's memory-population rules so all eight 16 GB modules are recognised at full capacity and run at DDR5-4800 with CL40 timing at 1.1 V.

How can I confirm the kit is running at the rated DDR5-4800 CL40 speed after installation?

Enter the BIOS or use a system-information tool such as CPU-Z and verify the memory frequency reads 4800 MT/s (PC5-38400) with CAS latency 40 and voltage at 1.10 V. The registered ECC design also logs corrected errors, confirming the modules are active and stable.

Does the package include only the eight 16 GB RDIMMs or are any extra parts such as heat spreaders or cables supplied?

The box contains the 128 GB kit comprised of eight 16 GB DDR5-4800 1Rx8 ECC registered RDIMMs. No heat spreaders, cables or additional accessories are included.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.