BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277131BTC
Skladom
NEMIX RAM
NEMIX RAM 128GB 8x16GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SSW memory upgrade
An eight-module 128 GB DDR5 kit running at 6400 MT/s with CL52 latency, 1.1 V ECC registered RDIMMs validated for the Supermicro H13SSW
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 spec match ensures full-speed recognition
- 128 GB kit fills eight slots for maximum capacity
- Registered ECC design prevents silent data corruption
- 1 V operation keeps power draw low
- Built for Supermicro H13SSW motherboard
Exact-match DDR5-6400 kit for Supermicro H13SSW
This NEMIX RAM kit delivers 128 GB across eight 16 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.10 V operation. Registered ECC construction with 1Rx8 organisation matches the memory controller requirements of the Supermicro H13SSW motherboard so the full capacity is recognised at rated speed.
Suited for administrators populating every slot
The registered design offloads the memory controller allowing all eight slots to run fully populated while ECC corrects single-bit errors on the fly. Buyers who need unbuffered UDIMMs, SODIMMs, lower capacities, or modules validated for a different server platform should look elsewhere.
Straightforward 288-pin RDIMM installation
Modules seat in the standard 288-pin DDR5 RDIMM sockets; follow the motherboard manual for the approved population order to avoid a no-post condition. The most common issue is installing DIMMs in the wrong sequence or mixing ranks, which prevents the system from recognising the full 128 GB.
Prednosti
- Exact DDR5-6400 spec match ensures full-speed recognition
- 128 GB kit fills eight slots for maximum capacity
- Registered ECC design prevents silent data corruption
- 1 V operation keeps power draw low
- Built for Supermicro H13SSW motherboard
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 8X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
What motherboard must I already have for this 128GB kit to be recognized at full capacity and rated speed?
The kit is spec-matched for the Supermicro H13SSW motherboard and requires that board's 288-pin RDIMM slots to run at DDR5-6400 with CL52 timings.
How do the 1Rx8 registered ECC modules behave when installed alongside other registered DIMMs already in the server?
Registered architecture offloads the memory controller so every slot runs fully populated at full capacity while ECC corrects single-bit errors on the fly.
How can I verify the kit is running at its rated DDR5-6400 CL52 1.10V settings after installation?
Check the BIOS or UEFI memory information screen — it should show all eight 16GB modules at 6400 MT/s, CAS latency 52, and 1.10 V.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
