Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 CL40 1Rx8 ECC RDIMM 8x16GB Supermicro H14SSF memory upgrade

SKU CH-3CTN-59ZSP

128 GB DDR5-4800 ECC registered RDIMM kit (eight 16 GB modules, CL40, 1.1 V, 288-pin) validated for the Supermicro H14SSF motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Zobraziť ďalších 24 konfigurácií
  • 128GB total capacity from eight 16GB modules
  • DDR5-4800 speed with CL40 latency at 1.1V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor matches Supermicro H14SSF
  • Built with major-brand Samsung, Micron or Hynix chips

128GB DDR5 ECC RDIMM kit for Supermicro H14SSF

This 128GB kit contains eight 16GB DDR5 4800 Registered ECC modules built for the Supermicro H14SSF motherboard. It targets server administrators who need maximum capacity across every slot with error-correcting stability. The 1Rx8 rank and 1.1V voltage match the board's memory controller requirements exactly.

Registered 288-pin DDR5 4800 CL40 specification

The single specification that decides fitment is the Registered 288-pin DDR5 4800 CL40 1.1V 1Rx8 profile. The board only accepts RDIMM modules with this exact timing, voltage and rank; UDIMM or SODIMM alternatives will not be recognised. Matching these parameters ensures the system boots at full 128GB capacity and rated speed.

Straightforward slot population

Installation follows standard DIMM insertion: align the notch, press firmly until the latches click, and repeat for all eight slots in the order the motherboard manual specifies. The most common issue is populating slots in the wrong sequence, which can leave capacity unrecognised or force reduced speed. Consult the H14SSF manual for the approved population order before starting.

Prednosti

  • 128GB total capacity from eight 16GB modules
  • DDR5-4800 speed with CL40 latency at 1.1V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor matches Supermicro H14SSF
  • Built with major-brand Samsung, Micron or Hynix chips

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 4800 MT/s speed run at full rate on a Supermicro H14SSF?

Yes, the kit is spec-matched to the board so the memory controller recognises all 128 GB at DDR5-4800 with CL40 timing.

Does the 288-pin RDIMM interface limit how many modules I can install?

The registered design offloads the controller, allowing every slot to be populated at full capacity without signal degradation.

What clearance does the 8 x 16 GB kit need inside the chassis?

Standard 288-pin RDIMM height fits the H14SSF DIMM slots; no heat spreader means a low-profile profile for tight server enclosures.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.