BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277188BTC
Skladom
NEMIX RAM
NEMIX RAM 128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V CL52 288-PIN ECC Registered RDIMM memory upgrade
128GB DDR5 6400MHz ECC Registered RDIMM with CL52 latency and 1.1V operation, verified for Supermicro H13DSG-OM motherboard compatibility
- Capacity128GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128 GB capacity supports large workloads
- DDR5 6400 speed delivers rated throughput
- CL52 latency matches controller timing
- Registered ECC corrects single-bit errors
- 288-pin RDIMM fits Supermicro H13DSG-OM
System-specific DDR5 ECC RDIMM
This NEMIX RAM module delivers 128GB of DDR5 memory at 6400MHz PC5-51200 with CL52 latency and 1.1V operation. It is built as a 2Rx4 Registered ECC RDIMM for the Supermicro H13DSG-OM motherboard, using major OEM chips from Samsung, Micron or Hynix.
Thermals noise and power draw
The 1.1V operating voltage keeps power draw low for a high-capacity server DIMM. No heat spreader is fitted, so airflow across the 288-pin module relies on chassis cooling. Registered buffering reduces electrical load on the memory controller during sustained workloads.
Build fit and constraints
This kit requires a motherboard that accepts 288-pin DDR5 RDIMMs and supports the exact rank, voltage and timing profile. It will not work in UDIMM or SODIMM slots, nor in systems limited to lower capacities or different DDR generations. Verify the Supermicro manual for approved population order before installing.
Prednosti
- 128 GB capacity supports large workloads
- DDR5 6400 speed delivers rated throughput
- CL52 latency matches controller timing
- Registered ECC corrects single-bit errors
- 288-pin RDIMM fits Supermicro H13DSG-OM
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How do I install this 288-pin RDIMM in my Supermicro H13DSG-OM and which slot order should I follow?
Power down the server, open the chassis, and insert the module into the DDR5 slot specified by the motherboard manual for the first DIMM population; the keyed 288-pin edge connector only seats one way.
Will the ECC and registered buffer on this 128GB module need any firmware updates or component swaps over time?
No, the on-die ECC and registered architecture operate without firmware patches or user-replaceable parts for the life of the module.
At what point does the CL52 latency at 6400 MT/s become the bottleneck during sustained all-core workloads?
The fixed CAS latency of 52 cycles at the rated 6400 MT/s transfer rate is the first timing limit reached when the memory controller runs continuous read/write streams.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
