Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR4 SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 CL15 SODIMM POSIFLEX RT-5016Q memory upgrade

SKU CH-8C1G-Y2VPY

A 16 GB DDR4 SODIMM kit running at 2133 MHz with CL15 latency for the POSIFLEX RT-5016Q terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts POS terminal responsiveness
  • DDR4 2133 MHz matches system memory speed exactly
  • CL15 latency keeps data access tight
  • 2 V modules run cool in compact kiosk chassis
  • 260-pin SODIMM form factor fits POSIFLEX RT-5016Q slot directly

System-specific DDR4 SODIMM kit

This NEMIX RAM kit provides 16 GB of DDR4 2133 memory in two 8 GB SODIMM modules. It is built for the POSIFLEX RT-5016Q terminal and uses standard 260-pin unbuffered non-ECC chips at 1.2 V.

Upgrade from lower capacity or slower modules

Replacing a smaller kit or slower DDR4 SODIMMs with this 16 GB CL15 set adds headroom for multitasking in point-of-sale workloads. The jump is worthwhile when the terminal currently runs near its memory limit or operates at a lower speed grade.

Verify slot count and maximum supported capacity

Confirm the RT-5016Q has two free SODIMM slots and accepts 16 GB total before ordering. Check the service manual for any BIOS revision requirements and ensure the system does not require ECC or registered modules.

Prednosti

  • 16 GB kit boosts POS terminal responsiveness
  • DDR4 2133 MHz matches system memory speed exactly
  • CL15 latency keeps data access tight
  • 2 V modules run cool in compact kiosk chassis
  • 260-pin SODIMM form factor fits POSIFLEX RT-5016Q slot directly

Špecifikácie

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Otázky k tomuto produktu

Does this kit use the 260-pin SODIMM form factor for the POSIFLEX RT-5016Q?

Yes, each 8 GB module is a 260-pin DDR4 SODIMM that matches the terminal's memory slots.

What is the correct orientation step when inserting the modules into the terminal?

Align the notch on the module with the key in the slot, press firmly until the side clips click into place.

Will these non-ECC unbuffered modules require any firmware updates or periodic replacement?

No firmware updates are needed; the modules are designed for the system's lifetime under normal operating conditions.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.