Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR4 SODIMM modules, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666MHz CL19 SODIMM for POSIFLEX HS-3314

SKU CH-NXKE-N76ZC

16 GB DDR4 2666 MHz CL19 SODIMM kit validated for the POSIFLEX HS-3314 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB kit upgrades POSIFLEX HS-3314 terminal performance
  • DDR4 2666MHz speed handles point-of-sale workloads efficiently
  • CL19 latency at 1.2V keeps power draw low
  • 260-pin SODIMM form factor fits the all-in-one chassis
  • Major OEM Samsung Micron Hynix chips ensure reliability

POSIFLEX HS-3314 Memory Kit

This 16GB kit contains two 8GB DDR4 2666MHz SODIMM modules built for the POSIFLEX HS-3314 all-in-one terminal. It runs at 1.20V with CL19 latency and uses 260-pin unbuffered non-ECC chips. The kit is designed to match the terminal's factory specifications exactly.

Terminal Operators and IT Maintainers

The kit suits technicians upgrading a POSIFLEX HS-3314 that needs more multitasking headroom for point-of-sale software. It is not for desktop PCs, standard laptops, or servers that require ECC, registered modules, or different pin counts. Buyers needing ECC error correction or higher speeds should look elsewhere.

16GB Dual-Channel Capacity

Two 8GB ranks deliver 16GB total, letting the terminal run multiple POS applications and background services without swapping. The CL19 timing and 2666MHz bus handle typical retail workloads comfortably. Memory-intensive databases or virtualisation on the same terminal will exceed the available capacity.

Prednosti

  • 16GB kit upgrades POSIFLEX HS-3314 terminal performance
  • DDR4 2666MHz speed handles point-of-sale workloads efficiently
  • CL19 latency at 1.2V keeps power draw low
  • 260-pin SODIMM form factor fits the all-in-one chassis
  • Major OEM Samsung Micron Hynix chips ensure reliability

Špecifikácie

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

Otázky k tomuto produktu

Will this 260-pin DDR4 SODIMM kit fit the memory slots on a POSIFLEX HS-3314 terminal?

Yes, the kit is built as a 260-pin DDR4 SODIMM specifically for the POSIFLEX HS-3314 Compact All-in-One Terminal with Replaceable Printer.

Can I run these 1.20 V modules alongside any original memory that may already be in the HS-3314?

The modules operate at the standard DDR4 1.20 V, matching the voltage used by factory-installed DDR4 SODIMMs in the HS-3314.

How can I confirm the kit is running at 2666 MHz CL19 after installation?

Check the memory speed and CAS latency in the system BIOS or with a tool such as CPU-Z; they should report 2666 MHz and CL19.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.