BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278687BTC
Skladom
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-PIN SODIMM POSIFLEX XT-8315E JIVA memory upgrade
A 16 GB DDR4 3200 CL22 SODIMM kit built for the POSIFLEX XT-8315E JIVA terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Designed for POSIFLEX XT-8315E JIVA terminal
- 16 GB dual-channel kit (2 x 8 GB)
- DDR4 3200 MHz CL22 low-latency operation
- 2 V unbuffered non-ECC SODIMM efficiency
- 260-pin major-brand chips rigorously stress-tested
System-specific DDR4 SODIMM kit
This 16 GB kit contains two 8 GB DDR4 3200 modules built for the POSIFLEX XT-8315E JIVA terminal. The 260-pin SODIMM form factor fits the system's memory slots without modification. It targets IT teams maintaining fanless point-of-sale hardware that requires matched, validated memory.
Thermals noise and power
Each module runs at 1.2 V with no heat spreader, relying on the terminal's passive chassis for cooling. Unbuffered, non-ECC operation keeps the electrical load low in the fanless design. CL22 latency at 3200 MT/s delivers stable throughput within the platform's validated power envelope.
Kit contents and validation
The package supplies two 2Rx8 SODIMMs tested under load for compatibility with the POSIFLEX platform. Major-brand Samsung Micron or Hynix DRAM ensures consistent quality across the kit. No extra software or accessories are included; the modules are ready for direct installation.
Prednosti
- Designed for POSIFLEX XT-8315E JIVA terminal
- 16 GB dual-channel kit (2 x 8 GB)
- DDR4 3200 MHz CL22 low-latency operation
- 2 V unbuffered non-ECC SODIMM efficiency
- 260-pin major-brand chips rigorously stress-tested
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Otázky k tomuto produktu
How do I install the 260-pin SODIMM modules into the POSIFLEX XT-8315E JIVA terminal?
Power off the terminal and disconnect the power cable. Open the memory compartment, align the notch on each 260-pin SODIMM with the slot key, insert at an angle, then press down firmly until the side clips click into place.
Will the DDR4 modules need any firmware updates or periodic replacement during their service life?
The modules are non-ECC unbuffered DDR4 with no firmware to update. They have no moving parts and require no scheduled replacement; they are designed to remain in service for the lifetime of the terminal.
At what point does the CL22 latency become the bottleneck during continuous transaction processing?
CAS latency of CL22 at 3200 MT/s sets the minimum access delay for each memory request. Under sustained heavy workloads this fixed timing, not bandwidth, is the first limit encountered.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
