Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two bare green SODIMM sticks with black chips side by side

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR5 5600 CL46 1.1V 262-pin SODIMM for Supermicro X14SAV-TLN4F memory upgrade

SKU CH-BEAT-PDAZ4

A 16 GB dual-channel DDR5 SODIMM kit running at 5600 MT/s with CL46 timing and 1.1 V operation, validated for the Supermicro X14SAV-TLN4F motherboard

  • Capacity16GB (2 x 8GB)
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB dual-channel kit boosts multitasking headroom with two matched 8 GB modules
  • DDR5 5600 speed delivers high bandwidth at the rated PC5-44800 data rate
  • CL46 latency and 1.1 V operation match the platform's memory-controller expectations exactly
  • 262-pin SODIMM form factor fits the Supermicro X14SAV-TLN4F motherboard without adapters
  • Major OEM Samsung Micron Hynix chips provide tested stability at the specified speed and timing

16 GB DDR5 SODIMM kit for Supermicro X14SAV-TLN4F

This 16 GB kit contains two 8 GB DDR5 SODIMM modules rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro X14SAV-TLN4F motherboard and uses the 262-pin unbuffered form factor that the platform requires.

DDR5 5600 speed and CL46 timing limits

The memory runs at the DDR5 5600 (PC5-44800) standard with a fixed CL46 CAS latency and 1.1 V voltage. The module is non-ECC and single-rank 1Rx8, so the memory controller must support this exact timing and density combination for full-speed operation.

Verify Supermicro X14SAV-TLN4F population rules

Check the system manual for approved slot population order and maximum supported capacity before installing. The board requires 262-pin SODIMM modules; desktop UDIMMs will not fit and other DDR generations are electrically incompatible.

Prednosti

  • 16 GB dual-channel kit boosts multitasking headroom with two matched 8 GB modules
  • DDR5 5600 speed delivers high bandwidth at the rated PC5-44800 data rate
  • CL46 latency and 1.1 V operation match the platform's memory-controller expectations exactly
  • 262-pin SODIMM form factor fits the Supermicro X14SAV-TLN4F motherboard without adapters
  • Major OEM Samsung Micron Hynix chips provide tested stability at the specified speed and timing

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-818K2
Capacity16GB (2 x 8GB)
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Should I pick the 16 GB kit or a different capacity for my Supermicro X14SAV-TLN4F?

This kit provides 16 GB as two 8 GB modules, matching the board's DDR5-5600 SODIMM slots; check your manual for the maximum supported capacity and approved population order before deciding.

What does the DDR5-5600 rating deliver once the modules are installed?

The memory runs at 5600 MT/s with CL46 timing at 1.10 V, giving the bandwidth and latency the X14SAV-TLN4F memory controller expects for stable operation at rated speed.

Does the 262-pin SODIMM interface limit speed or capacity in this system?

The 262-pin DDR5 SODIMM form factor is the only type the board accepts; it carries the full DDR5-5600 signal and 1Rx8 organisation, so no interface bottleneck is introduced.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.