Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

NEMIX RAM

NEMIX RAM 16GB (4x4GB) DDR3 1066MHz PC3-8500 CL7 1.5V 240-Pin UDIMM desktop RAM

SKU CH-QBW9-SGKZG

A 16 GB kit of four 4 GB DDR3 1066 MHz UDIMM modules at CL7 and 1.5 V for compatible desktop motherboards

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB kit in four matched modules for straightforward capacity expansion
  • DDR3 1066 speed with CL7 latency for responsive data access
  • 5 V operation keeps power draw low on compatible boards
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Built with major-brand Samsung, Micron or Hynix chips for reliable operation

16 GB DDR3 kit for desktop upgrades

This NEMIX RAM kit supplies 16 GB of DDR3 memory across four 4 GB modules. It is built for standard desktop boards that accept 240-pin unbuffered non-ECC UDIMMs. The kit targets users who need a straightforward capacity increase for everyday workloads.

Check motherboard DDR3 support and slot count

Verify that your board runs DDR3 at 1066 MHz and has four free 240-pin slots before ordering. The modules operate at 1.5 V with CL7 timing, so the BIOS must be able to apply those settings. Confirm the maximum capacity per slot in your manual to ensure 4 GB modules are accepted.

Green PCB modules without heat spreaders

The sticks use a plain green PCB and ship without metal heat spreaders, keeping the profile low for tight CPU cooler clearances. Major-brand Samsung, Micron or Hynix ICs are used throughout. Standard 240-pin gold-edge connectors seat firmly in any compatible UDIMM slot for reliable daily operation.

Prednosti

  • 16 GB kit in four matched modules for straightforward capacity expansion
  • DDR3 1066 speed with CL7 latency for responsive data access
  • 5 V operation keeps power draw low on compatible boards
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Built with major-brand Samsung, Micron or Hynix chips for reliable operation

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD8500-428K4
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What is included in the NEMIX RAM 16GB kit and do I need to buy any additional modules?

The kit contains four 4 GB DDR3 UDIMM modules for a total of 16 GB. No extra modules are required to reach that capacity.

How do I decide between the available speed and latency options for this DDR3 1066 MHz CL7 kit?

This kit runs at 1066 MHz with a CAS latency of CL7 at 1.50 V. Choose it when your motherboard specifies PC3-8500 or DDR3 1066 operation.

What does the PC3-8500 rating mean for real-world desktop performance?

PC3-8500 indicates a peak transfer rate of 8500 MB/s per module. In a real machine the memory will run at 1066 MHz with CL7 timing, delivering that bandwidth when the board supports it.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.