SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00498937BTC
Skladom
NEMIX RAM
NEMIX RAM 16GB DDR4 2933 CL21 2Rx8 1.2V 288-Pin ECC RDIMM memory upgrade
16 GB DDR4 2933 MHz ECC registered RDIMM with CL21 latency for HPE servers
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption with registered DDR4 technology
- 16 GB capacity expands server memory for demanding workloads
- 2933 MHz speed delivers high bandwidth for intensive applications
- 2 V operation reduces power consumption in enterprise environments
- 288-pin RDIMM form factor fits compatible HPE server slots
HPE Server ECC RDIMM Upgrade
This 16GB DDR4 2933MHz registered module carries ECC and a 2Rx8 organisation for data integrity in HPE server and workstation platforms. It operates at 1.2V with CL21 latency and fits 288-pin DDR4 RDIMM slots. The stick is built with major OEM DRAM from Samsung, Micron or Hynix and is validated against HPE part numbers P00922-X21, P00922-H21 and P00922-K21.
Who This Suits and Who Should Look Elsewhere
IT administrators expanding memory in compatible HPE ProLiant or Apollo systems will find the registered ECC design matches factory specifications. Builders of consumer desktops, laptops or non-HPE workstations should look elsewhere because those platforms require unbuffered non-ECC UDIMMs and cannot use registered modules.
Capacity and Headroom
A single 16GB rank adds substantial capacity for virtualisation hosts, database buffers or large-file workloads on supported HPE hardware. The module runs at the rated 2933MT/s speed; systems that demand higher frequencies or lower latencies will not gain from this part, and configurations needing more than one module per channel must populate additional slots.
Prednosti
- ECC protection prevents data corruption with registered DDR4 technology
- 16 GB capacity expands server memory for demanding workloads
- 2933 MHz speed delivers high bandwidth for intensive applications
- 2 V operation reduces power consumption in enterprise environments
- 288-pin RDIMM form factor fits compatible HPE server slots
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR4 2933MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR23400-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | HPE |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory |
Otázky k tomuto produktu
Does my server need a 288-pin DDR4 RDIMM slot to accept this 16GB module?
Yes, the module is a 288-pin DDR4 RDIMM and requires a matching registered DIMM slot on the motherboard.
Can I mix this 2933 CL21 ECC registered stick with older DDR4 ECC RDIMMs that run at a lower speed?
The system will operate at the speed of the slowest installed module, so older DDR4 ECC RDIMMs will work but the new stick will downclock to match them.
How do I confirm the 16GB 2Rx8 module is recognised at 2933 MT/s with ECC active after installation?
Check the BIOS memory information or run a hardware utility such as dmidecode or CPU-Z to verify capacity, speed, rank and ECC status.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
