Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular circuit board with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 CL21 2Rx8 ECC RDIMM Dell R740 memory upgrade

SKU CH-SA0V-Y55BH

16GB DDR4-2933 ECC registered RDIMM, CL21 2Rx8 1.2V for Dell PowerEdge R740 servers

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 2933 boosts server throughput
  • ECC registered design protects data integrity
  • CL21 1.20V timing balances speed and stability
  • 2Rx8 288-pin RDIMM fits Dell R740 slots
  • Major OEM chips ensure reliable operation

Dell PowerEdge R740 compatible memory

This 16 GB DDR4 RDIMM is built for the Dell PowerEdge R740 rack server. It targets administrators who need to expand capacity in a validated configuration. The registered ECC design supports data integrity in production environments. Installation follows standard DIMM-slot procedures.

16 GB capacity with dual-rank layout

The module provides 16 GB in a single 2Rx8 rank, giving the memory controller two ranks per channel for improved bandwidth utilisation. At DDR4 2933 MT/s and CL21 latency it handles typical virtualisation and database workloads. Headroom is limited by the single-module density and the platform's maximum supported speed.

Registered ECC at 1.2 V

The module operates at 1.20 V with on-DIMM register and ECC circuitry. This combination is required by the R740 memory subsystem; unbuffered or non-ECC DIMMs will not function. The 288-pin DDR4 form factor matches the server's slots exactly.

Prednosti

  • 16GB DDR4 2933 boosts server throughput
  • ECC registered design protects data integrity
  • CL21 1.20V timing balances speed and stability
  • 2Rx8 288-pin RDIMM fits Dell R740 slots
  • Major OEM chips ensure reliable operation

Špecifikácie

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

Will this 2933 MHz DDR4 RDIMM work alongside the memory already installed in my PowerEdge R740?

The module is built to Dell PowerEdge R740 specifications, so it is compatible with the server's memory architecture.

How can I confirm the module is running at 2933 MHz with CL21 timings after installation?

Check the system BIOS or use a tool such as CPU-Z to verify the reported speed of 2933 MHz and CAS latency of 21.

What comes in the package and is anything else required to install it?

The box contains one 16 GB 288-pin DDR4 RDIMM; no additional parts are needed for installation.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.