BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279117BTC
Skladom
NEMIX RAM
NEMIX RAM 16GB DDR5 4800 CL40 1.1V 288-Pin UDIMM for Kingston KVR48U40BS8-16 memory upgrade
16 GB DDR5 4800 CL40 1.1 V 288-pin UDIMM for Kingston-compatible desktop upgrades
- Capacity16GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB DDR5 4800 MHz boosts desktop responsiveness
- CL40 CAS latency keeps data flowing smoothly
- 1 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop slots
- Compatible with Kingston KVR48U40BS8-16 for guaranteed fit
16GB DDR5 UDIMM for Kingston systems
This 16GB DDR5 module runs at 4800MHz with CL40 latency and 1.10V operation. It uses a 288-pin unbuffered non-ECC design built for desktop motherboards that accept Kingston KVR48U40BS8-16 memory. The single-rank 1Rx8 configuration fits standard DDR5 slots. Builders upgrading compatible Kingston platforms can install it directly.
Unbuffered non-ECC build with major OEM chips
The stick uses Samsung, Micron or Hynix components without a heat spreader, keeping the profile low for tight slots. As an unbuffered non-ECC UDIMM it plugs straight into consumer desktop boards that support DDR5 4800. No registration or error correction circuitry means simpler signal paths for standard workloads. The 1.10V voltage matches the DDR5 baseline.
CL40 latency at DDR5 4800 decides fit
The critical spec is CAS latency 40 at 4800MT/s, which determines whether your motherboard and CPU memory controller will run the module at its rated speed without manual tuning. Systems requiring lower latency or higher data rates will not reach their targets with this part. Buyers needing ECC, registered buffering or speeds above 4800MT/s should look elsewhere.
Prednosti
- 16 GB DDR5 4800 MHz boosts desktop responsiveness
- CL40 CAS latency keeps data flowing smoothly
- 1 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop slots
- Compatible with Kingston KVR48U40BS8-16 for guaranteed fit
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | Kingston Desktop PC Compatible Series Memory |
| Model | Kingston DDR5 4800MHZ ECC Unbuffered UDIMM |
| Part Number | MD38400-618K1 |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Kingston |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM |
Otázky k tomuto produktu
What does the DDR5 4800 PC5-38400 rating cap in practice?
The module runs at 4800 MT/s with a PC5-38400 bandwidth ceiling; the memory controller will not exceed this data rate.
What physical slot and notch does this 288-pin UDIMM require?
It fits a standard desktop DDR5 DIMM socket with the 288-pin keying; the notch position matches the DDR5 specification.
How is the stick installed, and what step do people often miss?
Align the notch, press firmly until both side clips click shut, then verify the module is fully seated by checking the clips are vertical.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
