Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green printed circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 ECC RDIMM HPE P50309-B21 memory upgrade

SKU CH-HSVT-TANHY

16 GB DDR5-4800 ECC registered RDIMM, CL40 1Rx8 at 1.1 V, 288-pin, validated for HPE P50309-B21 servers

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 CL40 boosts server throughput
  • ECC RDIMM registered design protects data integrity
  • 10 V low voltage reduces power draw
  • 1Rx8 single-rank layout simplifies memory population
  • 288-pin DDR5 form factor fits HPE P50309-B21 slots

HPE Server 16GB DDR5 4800 ECC RDIMM

This 16GB DDR5 4800 CL40 registered DIMM is built for HPE servers and workstations that require ECC memory. The 1Rx8 module operates at 1.10V and fits standard 288-pin DDR5 slots. It carries the HPE P50309-B21 part number for direct compatibility.

Who this suits and who it does not

IT teams expanding HPE systems with validated ECC registered memory will find this module a direct match. Buyers needing unbuffered UDIMMs, non-ECC modules, or different capacities should look at other parts.

Deciding specification — DDR5 4800 CL40 1Rx8 ECC

The registered ECC design with CL40 latency at 4800 MT/s determines whether this DIMM works in your HPE platform. Verify the server manual requires registered ECC RDIMMs before ordering.

Prednosti

  • 16 GB DDR5 4800 CL40 boosts server throughput
  • ECC RDIMM registered design protects data integrity
  • 10 V low voltage reduces power draw
  • 1Rx8 single-rank layout simplifies memory population
  • 288-pin DDR5 form factor fits HPE P50309-B21 slots

Špecifikácie

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHPE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

What does the 4800 MHz speed mean once the module is installed in a server?

The module runs at DDR5 4800 (PC5 38400) data rate when the system memory controller is configured for that speed.

How does the registered ECC interface affect usable bandwidth and error handling?

The registered buffer adds one clock cycle of latency while the ECC logic corrects single-bit errors and detects multi-bit errors without halting the system.

Will the 288-pin RDIMM fit in a standard HPE server DIMM slot without a heatsink?

Yes, the 288-pin DDR5 RDIMM form factor matches HPE server slots and the module has no heat spreader, so it fits in standard air-flow channels.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.