Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 RDIMM modules with black chips, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 192GB (2×96GB) DDR5 4800 CL40 1.1V ECC RDIMM 2Rx4 Supermicro H13SVW-NT-OS2 memory upgrade

SKU CH-72EF-3XDCR

192GB DDR5 ECC RDIMM kit (2×96GB) at 4800 MT/s, CL40, 1.1V, validated for Supermicro H13SVW-NT-OS2

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Zobraziť ďalších 12 konfigurácií
  • 192 GB total capacity from two 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency matches the server's rated timing
  • 1 V registered ECC RDIMM design offloads the memory controller and corrects single-bit errors
  • 2Rx4 dual-rank organisation enables full-capacity population across all supported slots
  • Validated compatibility with the Supermicro H13SVW-NT-OS2 motherboard for guaranteed recognition

Targeted server upgrade

This 192GB kit delivers two 96GB DDR5 RDIMMs built for the Supermicro H13SVW-NT-OS2 motherboard. Each module runs at 4800 MT/s with CL40 latency at 1.10V. Registered ECC circuitry and 2Rx4 organisation satisfy the board's population rules for full-capacity operation.

Thermals noise and power

Bare modules without heat spreaders rely on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller while ECC corrects single-bit errors in flight. The 1.10V operating voltage keeps per-module power draw low in densely populated configurations.

When the jump pays off

Systems running at lower capacity or speed that hit memory bottlenecks in virtualisation or database workloads benefit from the 192GB ceiling. Buyers who need more than two DIMM slots or a different form factor cannot use this kit.

Prednosti

  • 192 GB total capacity from two 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency matches the server's rated timing
  • 1 V registered ECC RDIMM design offloads the memory controller and corrects single-bit errors
  • 2Rx4 dual-rank organisation enables full-capacity population across all supported slots
  • Validated compatibility with the Supermicro H13SVW-NT-OS2 motherboard for guaranteed recognition

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install these 288-pin RDIMM modules in my Supermicro H13SVW-NT-OS2 motherboard, and what step is commonly missed?

Power off the server, open the chassis, locate the DDR5 slots, and align each module's notch with the slot key before pressing firmly until both clips lock. The step often missed is checking the motherboard manual for the exact DIMM population order required for 2Rx4 registered memory to initialise at 4800 MT/s.

What maintenance or replacement will this 192GB kit need over its service life?

No routine maintenance is required for these registered ECC DDR5 modules. They have no heat spreaders or moving parts. Replacement is only necessary if a module fails, which is covered by the manufacturer's lifetime replacement warranty.

What limit appears first when this memory runs at sustained load in a fully populated configuration?

The registered buffer and ECC logic add a small latency overhead, so the CL40 timing at 1.10V is the primary limit you will observe under continuous heavy workloads rather than thermal throttling, since the modules operate without heat spreaders at standard DDR5 voltage.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.