Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 RDIMM modules in a kit, bare circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-7DGW-KT8CH

192 GB DDR5-5600 ECC registered RDIMM kit (2 × 96 GB) validated for Supermicro H13DSH motherboards

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Zobraziť ďalších 30 konfigurácií
  • 192 GB total capacity with two 96 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high-throughput data paths
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage matches the Supermicro H13DSH memory controller specification
  • 288-pin RDIMM form factor fits the exact DIMM slots required by the H13DSH motherboard

192 GB DDR5 ECC RDIMM kit

This NEMIX RAM kit delivers 192 GB of DDR5 registered ECC memory in a matched pair of 96 GB modules. It runs at 5600 MT/s with CL46 latency at 1.10 V, using 2Rx4 organisation and 288-pin RDIMM form factor. The modules are verified for the Supermicro H13DSH motherboard.

Suited for capacity-focused server builds

The kit targets administrators expanding a Supermicro H13DSH platform with maximum registered ECC capacity per slot. Registered buffering and on-die ECC maintain stability when every channel is fully populated. Buyers needing unbuffered UDIMMs, SODIMM form factor, or non-ECC memory should look elsewhere.

2Rx4 registered ECC at DDR5-5600

The decisive specification is the 2Rx4 registered ECC configuration operating at DDR5-5600 (PC5-44800) with CL46 timing at 1.10 V. This exact rank, voltage, and timing combination allows the H13DSH memory controller to recognise the full 192 GB capacity and run at rated speed without downclocking.

Prednosti

  • 192 GB total capacity with two 96 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high-throughput data paths
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage matches the Supermicro H13DSH memory controller specification
  • 288-pin RDIMM form factor fits the exact DIMM slots required by the H13DSH motherboard

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H13DSH, and which slot-population rule is most often missed?

Insert both 96 GB RDIMMs into the channels specified by the H13DSH manual for a two-DIMM configuration; the step most often missed is following the exact slot order so the memory controller sees the 2Rx4 ranks at the rated 5600 MT/s.

What maintenance or replacement will this 192 GB ECC RDIMM kit need over its service life?

No scheduled maintenance is required; the registered ECC design corrects single-bit errors automatically, and the modules are covered by a lifetime replacement warranty if a hardware fault ever appears.

What is the first limit that appears when the kit runs at 5600 MT/s under sustained load?

The CAS latency of CL46 at 1.10 V sets the timing boundary; the registered buffer keeps every slot stable at full 192 GB capacity, so the latency figure is the first constraint you encounter.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.