eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
25,99 USD
0.00033156BTC
Skladom
NEMIX RAM
NEMIX RAM 1TB DDR5 6400 CL52 16x64GB RDIMM Supermicro H14DST-FL memory upgrade
1TB DDR5-6400 ECC registered RDIMM kit of sixteen 64GB modules at CL52 and 1.1V for Supermicro H14DST-FL servers
- Capacity1TB (16 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Full-capacity 1 TB kit recognised at rated DDR5 6400 speed
- 16 matched 64 GB modules populate every slot on the Supermicro H14DST-FL
- Registered ECC design corrects single-bit errors to prevent silent data corruption
- 2Rx4 organisation and 1.10 V operation match the board's memory-controller requirements
- 288-pin RDIMM form factor fits the exact DIMM slots the motherboard provides
1 TB DDR5 ECC RDIMM kit for Supermicro H14DST-FL
This 1 TB kit supplies 16 modules of 64 GB each, built as DDR5 6400 CL52 registered ECC RDIMMs at 1.1 V. It targets operators of the Supermicro H14DST-FL motherboard who need maximum supported capacity with server-grade error correction.
Registered 2Rx4 modules on 288-pin form factor
Each module uses a 2Rx4 organisation and registered buffering to reduce electrical load on the memory controller when all slots are populated. The 288-pin RDIMM form factor matches the board's physical sockets, while ECC detects and corrects single-bit errors during operation.
Replaces partial or lower-capacity DDR5 RDIMM sets
Install this kit when the platform currently runs fewer than 16 modules or lower-density RDIMMs and the workload demands full 1 TB capacity at DDR5 6400 speeds. The jump is worth it when registered ECC stability and maximum slot population are required for production services.
Prednosti
- Full-capacity 1 TB kit recognised at rated DDR5 6400 speed
- 16 matched 64 GB modules populate every slot on the Supermicro H14DST-FL
- Registered ECC design corrects single-bit errors to prevent silent data corruption
- 2Rx4 organisation and 1.10 V operation match the board's memory-controller requirements
- 288-pin RDIMM form factor fits the exact DIMM slots the motherboard provides
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K16 |
| Capacity | 1TB (16 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 16X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
What speed does the DDR5 6400 interface actually run at when all 16 slots are populated?
The kit is rated for DDR5 6400 (PC5-51200) at 1.10V with CL52 timing. The registered design lets every slot run at this rated speed when fully populated.
What physical slot and form factor does this 288-pin RDIMM kit require on the Supermicro H14DST-FL?
The motherboard needs 16 DDR5 RDIMM slots that accept 288-pin registered modules. UDIMM or SODIMM modules will not fit or function.
What is the correct DIMM population order for installing all 16 modules on this board?
Consult the Supermicro H14DST-FL manual for the exact slot-filling sequence. The board's memory-population rules dictate which slots must be filled first for full 1TB recognition.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
32,99 USD
0.00042087BTC
Skladom
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
23,99 USD
0.00030605BTC
Skladom
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
21,99 USD
0.00028053BTC
Skladom