Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green DDR5 RDIMM sticks without heat spreaders in a row

NEMIX RAM

NEMIX RAM 256GB 4x64GB DDR5 6400MHz CL52 4Rx4 ECC Registered RDIMM memory upgrade

SKU CH-SNRP-91GNV

256 GB kit of four 64 GB DDR5 RDIMMs running at 6400 MHz with CL52 latency, 1.1 V registered ECC and 4Rx4 organisation for the Supermicro X14SDV-36CE-SP3F motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for memory-intensive workloads
  • Registered ECC architecture corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches platform requirements for efficient power draw at full load
  • Validated for Supermicro X14SDV-36CE-SP3F motherboard ensuring correct population and recognition

Server-grade DDR5 ECC RDIMM kit

This 256 GB kit contains four 64 GB registered DDR5 modules rated at 6400 MHz with CL52 latency and 1.10 V operation. It is built for Supermicro X14SDV-36CE-SP3F motherboards that require 288-pin ECC RDIMMs populated in matched sets.

Suited for capacity-bound server workloads

The 4Rx4 registered design lets every slot run fully populated at rated speed while on-die ECC corrects single-bit errors without halting the system. Builders who need unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for desktop platforms should look at something else.

Drops into validated Supermicro configurations

Each 288-pin RDIMM installs directly into the board's DDR5 slots following the manual's population order, with no extra power cables or cooling hardware required. The registered buffer reduces electrical load on the memory controller, freeing headroom for maximum DIMM counts in multi-socket chassis.

Prednosti

  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for memory-intensive workloads
  • Registered ECC architecture corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches platform requirements for efficient power draw at full load
  • Validated for Supermicro X14SDV-36CE-SP3F motherboard ensuring correct population and recognition

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

My server has a Supermicro X14SDV-36CE-SP3F motherboard — what must it already support for this 256 GB kit to work?

The board must accept 288-pin DDR5 RDIMMs, run at 1.1 V, and allow 4Rx4 registered ECC modules so the kit is recognised at full capacity and at DDR5-6400 speed.

Can I mix these 4Rx4 DDR5-6400 RDIMMs with lower-rank registered ECC modules already installed in the same Supermicro board?

Mixing ranks is possible only if the motherboard's memory-population rules allow it; the manual lists approved DIMM order and maximum ranks per channel for full-speed operation.

After installing the four 64 GB modules how can I confirm the kit runs at DDR5-6400 CL52 with ECC active?

Check the BIOS memory information or the OS memory report — both should show 256 GB total, 6400 MT/s data rate, CL52 latency, 1.1 V, and ECC enabled.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.