BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277887BTC
Skladom
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 2Rx8 1.2V UDIMM ThinkMate VSX-R5-540X1 memory upgrade
32 GB dual-channel DDR4 3200 CL22 kit validated for ThinkMate VSX-R5-540X1 workstations
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit doubles capacity for demanding workloads
- DDR4 3200 speed matches platform spec for stable throughput
- CL22 latency and 1.2 V voltage keep power draw low
- 2Rx8 dual-rank layout optimises bandwidth on supported boards
- Tested compatible with ThinkMate VSX-R5-540X1 workstation
System-Specific 32 GB Kit
This NEMIX RAM kit delivers 32 GB of DDR4 memory in a matched pair of 16 GB modules. It is built for the ThinkMate VSX-R5-540X1 workstation and targets IT professionals who need validated compatibility in mission-critical environments. The unbuffered, non-ECC design suits desktop-class boards that do not support registered DIMMs.
Upgrade From Lower Capacity DDR4
The kit replaces smaller DDR4 configurations such as 8 GB or 16 GB total capacity running at lower speeds or looser timings. A jump is worthwhile when workloads exceed the current memory ceiling, causing paging or limiting virtual-machine density. The 3200 MT/s rating and CL22 latency match the platform's supported specification without requiring manual tuning.
Dual-Channel 288-Pin UDIMM Fit
Two 288-pin UDIMM modules populate a dual-channel motherboard layout at the standard 1.20 V operating voltage. The 2Rx8 organisation works with consumer and workstation chipsets that accept unbuffered DDR4. No heat spreader is fitted, so clearance is minimal and airflow is unrestricted. Builders needing ECC, registered modules or DDR5 should select a different product line.
Prednosti
- 32 GB kit doubles capacity for demanding workloads
- DDR4 3200 speed matches platform spec for stable throughput
- CL22 latency and 1.2 V voltage keep power draw low
- 2Rx8 dual-rank layout optimises bandwidth on supported boards
- Tested compatible with ThinkMate VSX-R5-540X1 workstation
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Otázky k tomuto produktu
Will the 288-pin DDR4 UDIMM modules fit the ThinkMate VSX-R5-540X1 motherboard slots?
Yes, these 288-pin DDR4 UDIMMs are designed for the ThinkMate VSX-R5-540X1 workstation and match the required physical form factor.
What is the correct way to seat the 2Rx8 modules so the system recognises the full 32 GB kit?
Insert each 16 GB module firmly until the retention clips click on both sides; install them in the matched-channel slots shown in the ThinkMate manual.
Do these non-ECC unbuffered DIMMs need any firmware updates or periodic re-seating over time?
No firmware updates are required; the modules run at 1.20 V with standard JEDEC timings and do not need scheduled maintenance.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
