NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 ECC RDIMM 1Rx8 1.1V
32 GB dual-channel DDR5 kit with ECC registered DIMMs at 5600 MT/s, CL46 and 1.1 V
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency46
- Voltage1.1V
- ECCYes
- Buffered/RegisteredRegistered
- ECC protection catches data errors for server reliability
- Registered design reduces electrical load on the memory controller
- 5600 MT/s DDR5 speed delivers high bandwidth for demanding workloads
- 1 V operation lowers power draw per module
- Dual 16 GB modules provide 32 GB total capacity
32GB DDR5 5600 ECC RDIMM kit
This 32GB kit contains two 16GB DDR5 5600 registered DIMMs with ECC and a CAS latency of 46. The modules operate at 1.1V and use a 1Rx8 organisation on 288 pins. They are built for servers that require DDR5 5600 registered ECC memory and are not compatible with standard PC platforms.
Registered ECC with OEM chips
Registered buffering and on-die ECC provide the data-integrity and signal stability that multi-socket server platforms expect. The kit uses major OEM DRAM from Samsung, Micron or Hynix and carries a lifetime replacement warranty from the manufacturer.
Suited for DDR5 5600 server upgrades
This kit fits administrators upgrading or populating DDR5 5600 registered ECC slots in compatible servers. Builders needing unbuffered non-ECC memory for consumer desktops or laptops should select a different module type.
Prednosti
- ECC protection catches data errors for server reliability
- Registered design reduces electrical load on the memory controller
- 5600 MT/s DDR5 speed delivers high bandwidth for demanding workloads
- 1 V operation lowers power draw per module
- Dual 16 GB modules provide 32 GB total capacity
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR44800-618K2-SM-AS-1115HS-TNR |
| Part Number | Part#: MR44800-618K2-SM-AS-1115HS-TNR |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Otázky k tomuto produktu
How often should I expect to replace the DDR5 5600 ECC RDIMM modules under normal server workloads?
DDR5 ECC RDIMM modules are solid-state components with no moving parts, so they do not have a scheduled replacement interval. They are designed to run for the life of the server unless a physical fault occurs.
Will the CAS latency of 46 become a bottleneck before the 5600 MT/s throughput limit in sustained compute tasks?
The CL46 timing is the specified latency for the DDR5 5600 rating; both figures are matched by the manufacturer. In sustained workloads the memory controller manages timing and throughput together, so neither value alone acts as a separate bottleneck.
How much heat does the 1.1 V registered kit generate when all 32 GB run continuously at 5600 MT/s?
Operating at 1.1 V, the DDR5 RDIMMs draw low power for their density. The registered design adds minimal overhead, so typical case airflow is sufficient; no special cooling is required for continuous operation.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.



