NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 6400 CL52 ECC Registered RDIMM Supermicro H13SVW-NT
A 32 GB DDR5 ECC registered RDIMM kit for Supermicro H13SVW-NT servers, running at 6400 MT/s with CL52 latency and 1.1 V operation
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 kit runs at rated speed
- 1Rx8 Registered ECC corrects single-bit errors on the fly
- 1 V operation matches server memory controller spec
- 288-pin RDIMM form factor fits Supermicro H13SVW-NT slots
- 32 GB dual-rank capacity enables full population
Exact-match DDR5 ECC RDIMM kit
This NEMIX RAM kit delivers 32 GB of DDR5 6400 memory as two 16 GB Registered ECC RDIMMs. The modules run at CL52 with a 1.1 V operating voltage and a 1Rx8 organisation. They are built to the exact rank, voltage and timing the Supermicro H13SVW-NT motherboard expects for full-capacity recognition.
Suited for Supermicro H13SVW-NT upgrades
This kit suits administrators expanding or repairing a Supermicro H13SVW-NT server that requires Registered ECC DDR5 RDIMMs. It is not for systems that accept only unbuffered UDIMMs or SODIMM form factors. Buyers needing higher total capacity or different rank configurations should verify their board's population rules first.
Check motherboard memory population rules
Before ordering, consult the Supermicro H13SVW-NT manual for supported capacities per slot and the approved DIMM installation order. Confirm the board requires 288-pin Registered DDR5 modules and that your current configuration allows a two-module kit. Verify the server's BIOS version supports the stated speed and timing.
Prednosti
- Exact-match DDR5-6400 kit runs at rated speed
- 1Rx8 Registered ECC corrects single-bit errors on the fly
- 1 V operation matches server memory controller spec
- 288-pin RDIMM form factor fits Supermicro H13SVW-NT slots
- 32 GB dual-rank capacity enables full population
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Do I need a motherboard with 288-pin DDR5 slots that supports Registered ECC RDIMMs for this kit to work?
Yes, the kit requires a board with 288-pin DDR5 slots that accept Registered ECC RDIMMs at 1.10 V; the Supermicro H13SVW-NT is the validated platform.
Will this DDR5-6400 CL52 kit run alongside slower DDR5 modules already installed in the server?
The memory controller will down-clock all populated slots to the lowest common speed and latency, so older slower DDR5 DIMMs will limit this kit to their lower rate.
How can I confirm the system sees the full 32 GB at DDR5-6400 after installation?
Check the BIOS memory information or the OS memory report for 32 GB total, DDR5-6400 (PC5-51200) speed, CL52 timings, and ECC Registered status on both 1Rx8 modules.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.



