Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 2Rx8 1.1V ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-3CHZ-VJXEN

32 GB DDR5 4800 registered ECC RDIMM, 2Rx8 CL40 1.1 V, validated for Supermicro H13SRH motherboards

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB

Zobraziť ďalších 18 konfigurácií

Speed 4800MHz

  • 32 GB DDR5 capacity expands server memory headroom for heavy workloads
  • 4800 MT/s speed with CL40 latency delivers rated throughput for Supermicro H13SRH
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx8 rank organisation and 1.10 V voltage match the board's memory population rules exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters or mismatches

32GB DDR5-4800 RDIMM for Supermicro H13SRH

This 32GB DDR5 4800 CL40 2Rx8 registered ECC module is built for the Supermicro H13SRH motherboard. It runs at 1.1V and uses the 288-pin RDIMM form factor that the board requires. The exact rank, voltage and timing match the memory controller so the system recognises full capacity at rated speed.

Upgrade from lower-capacity or slower DDR5 RDIMMs

Replacing smaller or slower registered ECC DIMMs with this 32GB PC5-38400 module lets you fill more slots at the board's maximum supported frequency. The jump is worth it when your workload needs higher memory density per channel and the registered buffer keeps every populated slot stable.

Suits servers needing validated ECC RDIMM capacity

This module suits administrators expanding a Supermicro H13SRH system with validated registered ECC memory. It is not for desktops or workstations that accept only unbuffered UDIMMs, nor for laptops requiring SODIMMs, nor for any platform that does not support 288-pin DDR5 RDIMMs.

Prednosti

  • 32 GB DDR5 capacity expands server memory headroom for heavy workloads
  • 4800 MT/s speed with CL40 latency delivers rated throughput for Supermicro H13SRH
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx8 rank organisation and 1.10 V voltage match the board's memory population rules exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters or mismatches

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will this 288-pin DDR5 RDIMM fit the Supermicro H13SRH motherboard slots?

Yes, the module uses the exact 288-pin Registered DDR5 form factor the H13SRH requires, matching the board's physical slot keying and population rules.

What is the correct installation sequence for this 2Rx8 ECC RDIMM on the H13SRH?

Follow the motherboard manual's DIMM population order; the common mistake is skipping the prescribed slot sequence, which prevents the server from recognising the full 32 GB capacity at 4800 MT/s.

Does this 1.1 V CL40 module require any firmware updates or heat-spreader maintenance over time?

No firmware updates are needed for the memory itself; the module has no heat spreader, so only standard server dust cleaning applies, and ECC continues correcting single-bit errors throughout its service life.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.