Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips, 288 gold pins, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 2Rx8 RDIMM ECC Supermicro H13DSH memory upgrade

SKU CH-YNZ5-GMMKR

48GB DDR5 5600 RDIMM with ECC and registered architecture for the Supermicro H13DSH motherboard

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 48GB

Zobraziť ďalších 30 konfigurácií
  • Exact-match 48 GB DDR5-5600 CL46 2Rx8 RDIMM ECC for full rated speed
  • Verified fit for Supermicro H13DSH motherboard with 288-pin registered form factor
  • Enterprise stability via registered ECC correcting single-bit errors on the fly
  • Lifetime replacement warranty with free US-based technical support included
  • Built with major OEM Samsung, Micron, Hynix chips at 1.1 V

Exact-match server upgrade

This 48 GB DDR5-5600 Registered ECC RDIMM is built to the precise rank, voltage, and timing the Supermicro H13DSH memory controller expects. The 2Rx8 organisation, 1.1 V operation, and CL46 latency let the module be recognised at full capacity and run at its rated PC5-44800 speed without manual tuning.

Suited for populated H13DSH builds

The registered architecture offloads the controller so every slot can run fully populated at full capacity, while on-die ECC corrects single-bit errors before they reach production workloads. Builders using unbuffered UDIMMs, SODIMM form factors, or non-ECC modules should look elsewhere because the board requires registered 288-pin DDR5 RDIMMs.

Kit contents and fitment

The package delivers a single 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V CL46 288-pin ECC Registered RDIMM. No heat spreader is included, and no additional software or cables are bundled. Consult the system or motherboard manual for supported capacities, approved DIMM population order, and installation steps before fitting the module.

Prednosti

  • Exact-match 48 GB DDR5-5600 CL46 2Rx8 RDIMM ECC for full rated speed
  • Verified fit for Supermicro H13DSH motherboard with 288-pin registered form factor
  • Enterprise stability via registered ECC correcting single-bit errors on the fly
  • Lifetime replacement warranty with free US-based technical support included
  • Built with major OEM Samsung, Micron, Hynix chips at 1.1 V

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What motherboard must I already have for this 48GB DDR5 5600 RDIMM to be recognised at full capacity and rated speed?

This module is an exact-match upgrade verified for the Supermicro H13DSH motherboard; the board must use DDR5 288-pin RDIMM slots and follow its documented population rules.

Can I keep any existing DDR5 RDIMMs in the H13DSH and add this 2Rx8 CL46 kit alongside them?

Mixing is possible only if the other modules are also DDR5 5600 Registered ECC RDIMMs with matching voltage and timing; the H13DSH manual defines the approved population order for mixed ranks.

How do I confirm the kit is running at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or use a hardware-inventory tool to verify the memory speed reads 5600 MT/s, CAS latency shows 46, and ECC status reports enabled and functional.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.