Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 UDIMM modules without heat spreaders, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 1.10V UDIMM memory upgrade

SKU CH-4YAP-RN0HY

A 64 GB DDR5 kit with two 32 GB unbuffered UDIMMs running at 4800 MT/s CL40 and 1.10 V, validated for the MSI B760 Gaming Plus WiFi motherboard

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 2X32GB

  • 64 GB kit expands multitasking headroom for demanding workloads
  • DDR5 4800 MT/s bandwidth accelerates data-intensive applications
  • CL40 latency at 1.10 V balances speed with efficient power draw
  • Dual-rank 2Rx8 organisation maximises density per module slot
  • Validated for MSI B760 Gaming Plus WiFi motherboard compatibility

Kit composition and target system

This kit supplies two 32 GB DDR5 UDIMM modules for a total of 64 GB. It is built for MSI B760 Gaming Plus WiFi motherboards that accept non-ECC unbuffered memory at 4800 MT/s. Builders upgrading a compatible desktop workstation or gaming PC can install the pair directly into the 288-pin slots. The 1.10 V operating voltage matches the platform's default DDR5 specification.

Compatibility guidance

The modules suit owners of the named MSI board who need maximum capacity in two slots without ECC or registered buffering. Systems that require error-correcting code memory, registered DIMMs, or a different pin layout cannot use this kit. Buyers with motherboards outside the validated compatibility list should verify supported speeds and voltages before purchasing.

Decisive specification

The validated compatibility with the MSI B760 Gaming Plus WiFi motherboard is the single specification that determines whether this kit will function as intended. NEMIX RAM tests each module on that specific platform to confirm stability at DDR5 4800 CL40 with 2Rx8 organisation. If the target system is not that board, the buyer must confirm identical memory requirements independently.

Prednosti

  • 64 GB kit expands multitasking headroom for demanding workloads
  • DDR5 4800 MT/s bandwidth accelerates data-intensive applications
  • CL40 latency at 1.10 V balances speed with efficient power draw
  • Dual-rank 2Rx8 organisation maximises density per module slot
  • Validated for MSI B760 Gaming Plus WiFi motherboard compatibility

Špecifikácie

BrandNEMIX RAM
SeriesMSI Gaming Motherboard Compatible Series Memory
ModelMSI DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMSI
CAS LatencyCL40
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 288-pin DDR5 UDIMM modules fit the four DIMM slots on the MSI B760 Gaming Plus WiFi motherboard?

Yes, each 32 GB stick uses the standard 288-pin DDR5 UDIMM form factor that matches the four slots on that board.

Which slots should I populate first when installing the 2Rx8 dual-rank modules, and what common step is missed?

Install the two sticks in the slots recommended by the motherboard manual — usually the second and fourth slots from the CPU — and remember to press down firmly until both retention clips click.

Does the 1.10 V CL40 kit require any firmware update or ongoing maintenance after installation?

No firmware update is needed; the modules run at the rated 4800 MT/s CL40 1.10 V once the BIOS detects them, and no periodic maintenance is required.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.