BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027736BTC
Skladom
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR4 2666 ECC RDIMM CL19 1.2V 288-pin Synology SA3600 memory upgrade
A 64 GB DDR4 2666 ECC registered kit of four 16 GB modules validated for the Synology SA3600 NAS
- Capacity64GB (4 x 16GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in critical NAS workloads
- Registered design stabilises signal integrity for 64 GB capacity
- DDR4 2666 speed matches Synology SA3600 specifications
- 20 V operation lowers power draw and thermal output
- 288-pin RDIMM form factor ensures direct slot compatibility
Synology SA3600 64GB kit
This 64GB kit contains four 16GB DDR4 2666 registered DIMMs built for the Synology SA3600 NAS. Each module runs at 1.2V with CL19 latency and includes on-die ECC for data integrity. The registered design reduces electrical load on the memory controller for stable operation in multi-slot configurations. IT teams use this kit to expand capacity for virtualisation and file workloads.
Upgrade from smaller or non-ECC kits
The kit replaces lower-capacity unbuffered or non-ECC modules that cannot address the SA3600's full slot population. Registered signalling is required when all four slots are populated, so the jump is worth it when the system needs the full 64GB addressable space. Builders who need consumer DIMMs or unregistered memory should look elsewhere.
Sustained load behaviour
Modules are stress tested under load before shipping to verify stability during continuous NAS operations. The 1.2V operating voltage keeps thermal output consistent during extended file transfers or backup windows. Without a heat spreader, airflow across the 288-pin PCB manages temperatures in the SA3600 chassis. The 1Rx4 organisation maintains bandwidth efficiency across all populated channels.
Prednosti
- ECC protection prevents data corruption in critical NAS workloads
- Registered design stabilises signal integrity for 64 GB capacity
- DDR4 2666 speed matches Synology SA3600 specifications
- 20 V operation lowers power draw and thermal output
- 288-pin RDIMM form factor ensures direct slot compatibility
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-614K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR4 2666MHZ PC4-21300 1Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory KIT |
Otázky k tomuto produktu
Will these 288-pin DDR4 RDIMMs fit the memory slots in my Synology SA3600?
Yes, the kit is built as a direct upgrade for the Synology SA3600 and uses the standard 288-pin DDR4 RDIMM form factor that the NAS expects.
What is the correct order for installing the four 16 GB modules so the SA3600 recognises all 64 GB?
Populate the four slots following the SA3600 service manual — typically slot 1, then 2, 3, 4 — and seat each RDIMM until the retention clips click; the common mistake is stopping before the clips lock.
If a module fails years from now, can I replace just the faulty 16 GB stick?
The kit carries a lifetime replacement warranty, so a single defective 16 GB RDIMM can be swapped without returning the full 64 GB set.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
