BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278333BTC
Skladom
NEMIX RAM
NEMIX RAM 64GB (8x8GB) DDR4 2933MHz CL21 1.2V 288-Pin UDIMM memory upgrade
A 64 GB DDR4 kit of eight 8 GB unbuffered UDIMMs running at 2933 MHz CL21 1.2 V, validated for SuperMicro workstations
- Capacity64GB (8 x 8GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB kit (8 × 8 GB) scales multitasking headroom
- DDR4 2933 MT/s CL21 keeps latency predictable
- 20 V operation reduces power draw per module
- 288-pin UDIMM form factor fits standard desktop slots
- Validated for Supermicro 5039AD-I and C9X299-PGF workstations
SuperMicro Compatible DDR4 Kit
This 64GB kit contains eight 8GB DDR4 2933MHz UDIMM modules built for SuperMicro workstations and desktop systems. The non-ECC unbuffered design suits standard consumer and workstation boards that accept PC4-23400 memory. It targets users expanding capacity on supported SuperMicro platforms such as the 5039AD-I or C9X299-PGF.
Installing Eight UDIMM Modules
Installation follows standard UDIMM procedure: power down, open the chassis, align each module with the 288-pin slot and press until the latches click. The kit has no heat spreaders, so clearance is rarely an issue. The main risk is populating all slots on a board that limits speed or rank count when fully loaded, which can force the memory to run below 2933MHz.
DDR4 2933MHz Practical Limits
DDR4 2933MHz provides a fixed transfer rate of PC4-23400 with CL21 latency at 1.20V. Bandwidth and latency are bounded by the JEDEC specification for this speed grade; no higher frequency or tighter timing is guaranteed without manual tuning. Systems that only support lower DDR4 speeds will downclock the kit automatically.
Prednosti
- 64 GB kit (8 × 8 GB) scales multitasking headroom
- DDR4 2933 MT/s CL21 keeps latency predictable
- 20 V operation reduces power draw per module
- 288-pin UDIMM form factor fits standard desktop slots
- Validated for Supermicro 5039AD-I and C9X299-PGF workstations
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-818K8 |
| Capacity | 64GB (8 x 8GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (8X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Otázky k tomuto produktu
How do I verify the 64GB kit is running at 2933MHz CL21 after installation?
Open Task Manager or BIOS and confirm the speed reads 2933MHz with CAS latency 21 across all eight slots.
What is included in the MD23400-818K8 package and what must be purchased separately?
The box contains eight 8GB DDR4 UDIMM modules; no extra cables, brackets or software are required.
Which capacity version should I choose for a SuperMicro C9X299-PGF workstation?
This 64GB (8×8GB) kit matches the board's eight DDR4 slots and 2933MHz specification.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
