NEMIX RAM
NEMIX RAM 64GB DDR4 2933 4Rx4 ECC LRDIMM HPE P19044-B21 memory upgrade
64 GB DDR4 2933 ECC LRDIMM module for HPE servers, 4Rx4 CL21 1.2 V 288-pin
- Capacity64GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredLoad Reduced
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64GB capacity scales server memory for dense virtualisation workloads
- DDR4 2933 speed delivers high bandwidth for data-intensive applications
- ECC LRDIMM technology corrects errors and reduces electrical load on the memory bus
- 2V operation lowers power draw in large-scale deployments
- 288-pin LRDIMM form factor fits HPE P19044-B21 compatible server slots
HPE Compatible 64GB LRDIMM
This NEMIX RAM module delivers 64GB of DDR4 memory rated at 2933 MT/s with a CL21 latency. It operates at 1.2V and uses a 288-pin load-reduced form factor with 4Rx4 organisation. The module is built for HPE server and workstation platforms requiring ECC LRDIMM memory.
Suited for HPE server upgrades
IT teams expanding memory in compatible HPE systems will find this module matches the required specifications. Environments that need unbuffered DIMMs, non-ECC memory, or different rank configurations should select an alternative module type.
Handles large memory configurations
The 64GB capacity and load-reduced design allow dense population of memory slots for virtualization and database workloads. Systems limited to lower maximum module capacities or fewer populated channels will not be able to use the full density of this DIMM.
Prednosti
- 64GB capacity scales server memory for dense virtualisation workloads
- DDR4 2933 speed delivers high bandwidth for data-intensive applications
- ECC LRDIMM technology corrects errors and reduces electrical load on the memory bus
- 2V operation lowers power draw in large-scale deployments
- 288-pin LRDIMM form factor fits HPE P19044-B21 compatible server slots
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR4 288-Pin ECC LRDIMM Load Reduced Server Memory |
| Part Number | ML23400-944K1 |
| Capacity | 64GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | HPE |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 LRDIMM |
| Rank | 4Rx4 |
| Features | DDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR4 2933MHZ PC4-23400 4Rx4 1.2V CL21 288-PIN ECC LRDIMM Load Reduced Server Memory |
Otázky k tomuto produktu
Does this LRDIMM require a server motherboard with 288-pin DDR4 slots that support load-reduced memory?
Yes, the module is a 288-pin DDR4 LRDIMM and must be installed in a server board that explicitly supports load-reduced DIMMs at 1.2 V.
Can I mix this 4Rx4 64 GB module with existing 2Rx4 or 1Rx4 DDR4-2933 ECC RDIMMs in the same HPE server?
Mixing LRDIMMs with standard RDIMMs is not supported; all slots in a channel must use the same load-reduced technology for the system to boot.
How do I verify the module is running at DDR4-2933 CL21 with ECC active after installation?
Enter the BIOS or iLO interface and confirm the memory speed shows 2933 MT/s, CAS latency 21, and ECC status reports enabled for the new 64 GB DIMM.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.



